Solar regulator 12V/24V auto sense 60A
General Information
Charge controllers or regulators prevent the photovoltaic array from overcharging the batteries by limiting the current that flows into the batteries. When the batteries attain a set voltage,the controller disconnects the PV array,thus preventing overcharging.Controllers can also offer specific features such as Pulse Width Modulation,temperature compensation,low voltage disconnects.
Functions
1. Over load protection
2. Short circuit protection
3. Converse discharge protection
4. Reverse polarity connection protection
5. Thunder protection
6. Low voltage protection
7. Overcharge protection
8. Batteries stop and charge voltage HVD sets up
9. Charge and low voltage LCD sets up
10. Display the capability of the battery SOC
11. Loads and comeback setups.
12. Intellectualized temperature compensation
13. Record, calculate and display the charged AH on the LCD screen.
14. Record, calculate and display the discharged AH on the LCD screen.
15. CPU control and LCD display
Technical index:
|
Model |
WS-C2460 40A |
WS-C2460 50A |
WS-C2460 60A |
|
Rated voltage |
12V / 24V Automatic voltage recognition |
||
|
Max Load current |
40A |
50A |
60A |
|
Input voltage range |
12V-17V / 24V-34V |
||
|
Length≤1m Charge loop drop |
<0.25V |
||
|
Length≤1m Discharge loop drop |
<0.05V |
||
|
Over voltage protection |
17V/34V |
||
|
Full charge cut |
13.7V / 27.4V(Default value, can be otherwise set) |
||
|
Low voltage cut |
10.5V~11V / 21V~22V (Default value, can be otherwise set) |
||
|
Temperature compensation |
-3mv/°C /cell |
||
|
No load loss |
≤30mA |
||
|
Max wire area |
6mm2 |
||
|
Ambient temperature |
--25°C——+55°C |
||
