Manufacturer for13years chemicals history Good quality and Reputation Free samples,COA,SGS,CIQ Prompt delivery Specifications
1,PE PP PS PVC PET manufacturer 2,Virgin & Recycle 3,Film,Extrusion,Blow molding, Injection,etc 4,Factory price & Free sam
1,Item:HDPE LDPE LLDPE PP resin ,
2,Grade: Film , Extrusion, Blow molding, Injection molding , Pipe grade etc.
3,Application: All kinds of plastic products
4,Specification for example:
HDPE:
HDPE cable materialProperty | Unit | Typical Value |
Mass density | g/cm 3 | 0.941-0.959 |
Melt flow Rate(190 centidegree /2.16kg) | g/10min | ≤1.0 |
Tensile yield strength | MPa | ≥19.0 |
Flexural modulus | Mpa | ≥965 |
Elongation@ break | % | ≥400 |
Impact Embrittlement temperature | centidegree | MAX -118 |
Dielectric Constant | 100KHZ | 2.32 |
1MHZ | 2.31 | |
Loss Tangent | 100KHZ | MAX 0.0001 |
1MHZ | MAX 0.0001 | |
Volume resistivity | OHM-CM | MIN 1x10 15 |
Application | Mainly used for the production of high toughness of the telephone,cable insulation material | |
LDPE:
Physical Properties | Test Method | Nominal Value | Unit | |
Density | ISO 1183 | 0.921 | g/cm3 | |
Melt Mass-Flow Rate (MFR) | ISO 1133 | 1.9 | g/10min | |
Hardness | ||||
Shore Hardness (shore D) | ISO 868 | 45 | ||
Mechanical Properties | ||||
Tensile Modulus | ISO 527-2 | 175 | MPa | |
Tensile Strength | Yield, | ISO 527-2 | 9.0 | MPa |
Break, | 13.0 | MPa | ||
Tensile Strain(Break) | ISO 527-2 | 850 | % | |
Modulus of Elasticity | Internal Method | 250 | MPa | |
Thermal | ||||
Vicat Softening Temperature | ISO 306/A50 | 89.0 | °C | |
Melting Temperature (DSC) | DIN 53765 | 108 | °C | |
Peak Crystallization Temperature (DSC) | DIN 53765 | 97.0 | °C | |
Heat of Fusion | DIN 53765 | 110 | J/g | |
Electrical | ||||
Volume Resistivity | ASTM D257 | 8.5E+15 | ohm •cm | |
Dielectric Strength | ASTM D149 | 30.0 | kV/mm | |
Dielectric Constant (60Hz) | ASTM D150 | 2.20 | % | |
Dissipation Factor (60 Hz) | ASTM D150 | 0.00050 | ||
LLDPE
Properties | Test conditon | Test method | Test data | Unit |
Density | 0.91 | |||
MFI | 2 | |||
Drop impact strength | ASTM D-1709 | 90 | g | |
Elongation ,vertical/horizontal | ASTM D-882 | 600/800 | % | |
tensilestrength,thermal resistance | ASTM D-1004 | 105/95 | Kg/cm | |
elongation | ASTM D-638 | 930 | % | |
tensile strength | ASTM D-638 | 180 | ||
tensile strength,vertical/horizontal | ASTM D-882 | 380/350 | ||
Vicat softening point | ASTM D-1525 | 103 | °C | |
melting point | ASTM D-2117 | 126 | °C | |
Turbidity | ASTM D-1009 | 12 | % | |
45 glossness | ASTM D-2457 | 75 | % | |
purpose:
Product performance:High density polyethylene for non-toxic, tasteless and odorless white grain, melting point is 130 °C, the relative density for 0941-0960, it has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength, dielectric properties, environmental stress crack resistance is also good.
Applications:1,Used for extrusion packaging film, rope, weaving nets, fishing nets, pipe, injection molding is inferior commodities and shell, the bearing load components, rubber box, turnover box, extrusion blow molding container, hollow products, bottle.
2,Used for hollow molding products and blown film products such as food sack, groceries shopping bags, fertilizer lined with film, etc.
Catkin
Best Price PE80 PE100 of Pipe grade HDPE(High-density polyethylene) granule
