phenolic resin moulding compound high temperature resistance flame and arc resistance high surface hardness good electric

mould compound phenolic resin

A range of pure and modified phenolic resins are available for use in moulding compounds, which can enhance a variety of properties in the moulding compound, when used with the appropriate filler/fibre combination and process conditions:Liquid resin:

Grade	Appearance	SRY(%)	Viscosity @ 25 °c(cps)	Water(%)	Application
PF-8201	Yellow brown/red liquid	75 - 82	3,700 - 4,300	≤6	Wood flour, glass fibre etc
PF-8202	Yellow brown/red liquid	73 - 80	2,000 - 3,000	≤5	Wood flour, glass fibre etc
PF-8203	Yellow brown/red liquid	75 - 80	8,000 - 11,500	≤3	Wood flour, glass fibre etc

Solid resin:

Grade	Appearance	Softening point( °c )	Cure @ 150 oC(sec)	Pellet flow(mm)	Application
PF-8001	Yellow flakes/powder	95 - 105	55 - 90	35 - 55	Injection powder
PF-8002	Yellow flakes/powder	95 - 110	50 - 90	30 - 55	Injection powder
PF-8003	Yellow flakes/powder	110 - 120	70 - 90	20 - 30	Moulding powder
PF-8004	Yellow flakes/powder	95 - 105	60 - 90	35 - 60	Moulding powder

Packing and storage:

Liquid resin: Available in 30 / 200 / 240Kg metal or plastic drums. Resin must be stored under 25 o C in a well ventilated, cool, dry place, away from direct sunlight or other heat sources. Typical shelf life: 3 months in winter and 1 month in summer (storage under 10 o C is recommended).

Solid resin: Packed in 20 or 25 bags with Kraft paper-plastic woven composite outside, lined with plastic liner, or 500Kg polypropylene bulk bags. Resin must be stored below 25 o C in a well ventilated, cool, dry place, away from direct sunlight, or other heat sources. Do not stack bags too high in order to avoid agglomeration.

phenolic resin for moulding compounds