Ningbo Yinzhou H.T. Industry Co., Limited [China]

Stainless Steel Motor Body and Cast-iron Pump Body Cast-iron Impeller Stainless Steel Mechanical Seal

WSS Sewage Pump

WORKING PRINCIPLE

The pumps are fitted with an open impeller, which is mounted on the end of the enclosed by a large circular chamber and a base plate with machined insert. The suction opening in the base plate is directly in contact with the fluid to be pumped. The rotation impeller transmits kinetic energy to the fluid which is centrifuged in the ring chamber, where part of the kinetic energy is transformed into pressure energy. The particular design of the impeller optimizes hydraulic efficiency, while allowing the pump to handle muddy fluids containing solids in suspension and short fibers without danger of clogging.

PUMP INSTALLATION AND APPLICATIONS

The pumps are fitted with cast-iron or plastic single vane impellers, and are suitable for pumping liquids containing solids in suspension, including short fibers. The pumps are particularly recommended for handing clean water or sewage, refulgent water, water mixed with mud, groundwater and surface water in areas such as: residential housing blocks, public buildings, multi-storey car parts, car washes etc.

PERFORMANCE

The pumps have the following features:

-          exceptional sturdiness, even under severe working conditions;

-          long and stable performance curves with particularly high efficiency level.

STRUCTURAL CHARACTERISTICS

Stainless steel or plastic PUMP BODY and cast-iron pump body

Cast-iron IMPELLER

Stainless steel MECHANICAL SEAL (graphite to ceramic)

45# steel or stainless iron MOTOR SHAFT

INSULATION class E

PROTECTION IP68

OPERATING LIMITS

Fluid temperature up to +40°C;

Maximum operating depth 5m;

Trans medium's PH: 4~10.

PERFORMANCE CHART n=2900r/min

Stainless Steel Sewage Submersible Pumps