double forming station thermoforming machine 1)ISO9001:2008/CE 2)steady performance 3)advance technology 4)easy to operate
double forming station thermoforming machine
Technical Data
Model | BZ-261-D | BZ-261-S | |
Quantity of forming area | 1 | 2 | |
Forming length | mm | 660 | 660 |
Forming width | mm | 560 | 560 |
Forming height | mm | 150 | 150 |
Bottom stroke | mm | 270 | 270 |
Electrothermal-furnace power | kw | 15 | 15 |
Vacuum-pump power | kw | 1.1 | 1.1 |
Air compressor | m3/min | 0.4 | 0.5 |
Producing speed | pcs/h | 200~300 | 200~300 |
Power supply | AC 380V | AC 380V | |
Machine size | mm | 1660×1310×2080 | 2450×1310×2130 |
Machine weight | kg | 400 | 600 |
Description
Double forming station thermoforming machine could pack products of various specifications by vacuum forming . It is suitable for plastic material like PVC , PET , PP, PE etc . This model machine is fine workmanship , simple mechanism , easy to operate , steady performance , suitable for producing plastic products in miniature.
Working Principle:
Feed the material automatic→ heater clamp the material →the vacuum automatic start and forming →cool→ separate the mould and product →cut the product by hand operation →put the product away
Basic units:
1. Programmable logic control
2. Digital temperature controllers
3. Radiant heater panel heating system
4. Automatic oven drive with deceleration system
5. Manual film clamp frame
6. Automatic cooling blower(s)
7. Automatic positive displacement vacuum system
8. Automatic blow-off system
9. Steel components polyurethane coated
10. Far infrared ray heating system, micro-adjustable temperature control
Excellence of equipment:
1. Control system: The central integration control system, let feeder →heat →forming →cooling → out of mould →cutting as an automatic production line. This machine adopts import components make sure that the machine has high quality.
2. The heater control: The heater is made by stainless steel to avoid the same model machine which made by iron creates oxidizing iron fall down to material and make products useless
3. Temperature control system: Infrared ray heating ceramic tile and independent control system ensure be heated even, inside place heat preservation material reduce calories lost and save energy sources
4. Cold breeze system: Equipped with spray fog breeze cold system, no vibration and residual wind, expedite produce speed.
5. Transmission system: Adopt servo system and frequency conversion technology. The horsepower is strong, and pulls sheet length accurate. The machine can still promise that it is accurate and stable while under high speed operation.
6. Vibration stripping: Can adjust 0~9 times, twice vacuum forming make sure the blister no transmutation and easy to break off from mold.
7. Twice vacuum forming: Inside place twice vacuum forming make the difficult material easy to form and increase product’s quality.
8. Alarm system: Have the product quantity counter; when the plank is full it will be alarm.
9. Control methods: Manual and auto methods can be chose easy to operate machine, except loading material, laying off material and moving furnace.
raw material
mould
sample
Machine depending on the die cutting out the corresponding sample, the above presented mould and sample may not be the same, but the truth.
You can see our website for more product information, please don't hesitate to call.
double forming station thermoforming machine
