Fluorine Rubber Heat Shrink Tube 1.With Adhesive Liner 2.Shock resitance,Wear-resistant 3.I.D.:9.0~205mm
Flexible, high-temperature, solvent-resistant Fluororubber tubing
Application
With superior resistance to high and low temperature, fuids, solvents and corrosive chemical, FLUORORUBBER is particularly suitable for applications that require heat resistance (such as electric and hydraulic systems near engines and fuel tanks of airplanes and vehicles) and resistance to chemical solvents. It is particularly used in applications require high temperature (200°C) resistance or in chemically exposed environments. It can be used in applications where additional protection against weather, ultraviolet radiation and ozone degradation is needed. It is used for insulation and strain relief on appliances and for protection of electronic components.
Features/Benefits
·Shrink ratio: 2:1
·Excellent resistance to high temperatures, fluids, solvents, corrosive chemicals and radiation.
·Extreme resistance to fuels.
·High flame-retardance.
·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.
Operating Temperature Range
·Operating temperature range: -65°C~200°C
·Minimum shrink temperature: 150°C
·Minimum full recovery temperature: 220°C
Specifications/Standards
n Specification values
| Property | Requirement | Test method | Typical value |
Physical: | Tensile strength | 8.2MPa min. | ASTM D 638 | ≥10.3MPa |
Elongation | 250% min. | ASTM D 638 | ≥300% | |
Heat shock 300°C, 4hrs | No cracking, dripping or flowing | ASTM D 2671 | Pass | |
Low temperature flexibility -65°C, 4hrs | No cracking | ASTM D 2671 | Pass | |
Aging 250°C, 168hrs | ||||
Tensile strength after aging | 8.2MPa min. | ASTM D 638 | ≥8.2MPa | |
Elongation after aging | 200% min. | ASTM D 638 | ≥200% | |
Electrical: | Dielectric voltage withstand | 2500V,60sec,no breakdown | ASTM D 2671 | Pass |
Dielectric strength | 7.9KV/mm min. | ASTM D 2671 | ≥7.9KV/mm | |
Volume resistivity | 109Ω·cm min. | ASTM D 876 | ≥109Ω·.cm | |
Chemical: | Corrosion | No corrosion | ASTM D 2671 | Pass |
| Flammability | Self extinguishing within 15sec | ASTM D 2671 | Pass |
Fluid resistance: | 23°C,24hrs (aviation and diesel fuels, hydraulic fluids, lubricating oils, etc.) | |||
| Tensile strength | 8.2MPa min. | ASTM D 2671 | ≥8.2MPa |
| Elongation | 200% min. | ASTM D 2671 | ≥200% |
Product sizes
Size | Inside diameter (mm/inch) | Wall thickness (mm/inch) | Standard length (m/spool) | |
As supplied(min.) | After recovery(max.) | After recovery | ||
1/8 | 3.2(0.125) | 1.6(0.062) | 0.76±0.13(0.030±0.005) | 50 |
3/16 | 4.8(0.187) | 2.4(0.093) | 0.89±0.18(0.035±0.007) | 50 |
1/4 | 6.4(0.250) | 3.2(0.125) | 0.89±0.18(0.035±0.007) | 50 |
3/8 | 9.5(0.375) | 4.8(0.187) | 0.89±0.18(0.035±0.007) | 50 |
1/2 | 12.7(0.500) | 6.4(0.250) | 0.89±0.18(0.035±0.007) | 30 |
3/4 | 19.1(0.750) | 9.5(0.375) | 1.07±0.21(0.042±0.008) | 30 |
1 | 25.4(1.000) | 12.7(0.500) | 1.25±0.30(0.049±0.011) | 30 |
1 1/2 | 38.1(1.500) | 19.0(0.750) | 1.40±0.38(0.055±0.015) | 30 |
2 | 50.8(2.000) | 25.4(1.000) | 1.65±0.43(0.055±0.017) | 30 |
Fluorine Rubber Heat Shrink Tube
