mc nylon board 1.high strength and stiffness 2.high impact and notch impact strength 3.good wear resistance
Naturl MC Nylon Board
I. Nylon board Description
PA is recognized as the most widely used and known engineering plastic in the current market.
PA6 has the best performance, very tough, even at low temperatures, and high hardness in the surface, toughness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials. Its widely used in a variety of mechanical structures and spare parts. Compared to PA6, PA66 own the higher hardness, rigidity, a good resistance to wear and heat deflection temperature.
II. Nylon board Characteristics
Advantages
1. high strength and stiffness
2. high impact and notch impact strength
3. high heat deflection temperature
4. good at dampening
5. good abrasion resistance
6. low coefficient of friction
7. good chemical stability against organic solvents and fuels
8. excellent electrical properties, ease of printing and dyeing
9. food safe, noise reduction
III.Nylon board Machining Solution
Available for injection molding,extrusion and blow molding,etc.
IV.Nylon board Applications
Bearings, gears, wheels, roller shaft, water pump impeller, fan blades, oil delivery pipe, oil storage pipe, rope, fishing nets and transformer coil.
Nylon property data sheet
(PROPERTY) | Test method) | VALUE | UNITS |
Density | ASTM D792 | 1.13~1.15 | |
Melting temp. | 215~221 | °C | |
Min.service temp | -30 | °C | |
Vicat –VSP A/B/50 | ASTM D648 | 68 | °C |
(Tensile strength at yield) | ASTM D638 | 75 | Mpa |
Compressive strength | ASTM D257 | 85 | Mpa |
Volume resistance | ASTM D257 | 1012 | Ω.cm |
dielectric constant | ASTM D257 | 3.4 | 1 MHZ |
Flexaural stress at conentional Deflection | ASTM D790 | 120 | Mpa |
Water absorption | ASTM D570 | 1.2~3.0 | % |
Impact-zod Notched (at23 CKg- Cm/cm) | ASTM D256 | 5.5 | Kg om/cm with Notched |
Natural MC nlyon board
