Detailed Product Description
Carpoly Penetrating Sealer Epoxy Paint
General Description:
A high performance, two component chemically-cured 100% solids epoxy penetrating Sealer.
Typical Uses:
Recommended for rusty steel when environmental economic or safety concerns restrict abrasive blast cleaning. The extraordinary penetrating properties of P0167 provide a means of reinforcing rusty steel substrates, insuring adhesion of subsequent coatings. Equally effective at penetrating,reinforcing, and sealing concrete and masonry surfaces in all industrial environments.
Improves the effectiveness and efficiency of the maintenance painting process by penetrating and sealing crevices, joints, back-to-back angles of existing structures,
and edges of old coatings, improving the service life of the maintenance system. Also serves to seal agedWhite-Rusted zinc surfaces for recoating.
Advantages:
·Low VOC
·Reinforces rusty steel, masonry, and aged
White-Rusted zinc surfaces
·Penetrates surface rust, crevices, back-to-back angles
·Penetrates pores and tiny cracks in concrete and masonry surfaces
·Cures to a tough, water resistant coating
·100% volume solids
·Very low viscosity
·Long pot life
·Low film thickness required
·No shrinkage
·Applies easily by brush, roll, or spray
·Formulated without lead, chromate, or mercury components
Limitations of Use: Not recommended for use without a topcoat.
Color: Amber Clear
Finish: Medium Sheen
Reduction Solvent: Do not thin.
Clean-up Solvent: CP-10, CP-5 thinner
Weight/Gallon: 1.02 kg/L
VOC (EPA 24): 211 g/L
Solids By Volume: 100%
Theoretical Coverage at 1.0 Mil Dry: 40M2/L
Recommended Film Thickness: 37.5 micronsdry37.5 microns wet
Systems:
Please consult the appropriate system guide,
the particular job specification or your Carpoly coatings
Industrial Coatings Specialist for proper systems using this
product. Systems must be selected considering the
particular environment involved.
Service Temperature Limits: 121C
Minimum Dry Time (ASTM D 1640):
25and 50% R.H. to recoat overnight. Ventilation, filmthickness, humidity, thinning, and other factors caninfluence the rate of dry.
Shelf Life: 24 months at 25 unopened
Mix Ratio: 3.5base: 1 (converter) see mixing instructions.
Induction: None see mixing instructions.
Pot Life: 4 hours @ 725and 50% R.H.
