Detailed Product Description
Carpoly Polyurethane Coating
General Description:
A high performance, two-component chemically-cured aliphatic urethane enamel for use in area where protection and maximum gloss & color retention are required.
Typical Uses:
For use on properly prepared and primed steel, galvanized metal, aluminum, concrete floors. Ideal for use on exterior or interior structural steel, piping, metal buildings, control cabinetry, conveyors, pumps, storage tanks, motors, machinery, and transportation vehicles.
Advantages:
Ø Excellent corrosion resistance
Ø Outstanding resistance to mangle, chipping and scratching.
Ø Excellent chemical resistance
Ø Film of good hardness, anti-impact, abrasion. Can provide protect of long team
Ø Excellent gloss & color retention, applicability for exterior
Ø Easy applied by brush, roller, or spray
Color: White & Customer colors
Finish: Gloss ,Matt
Reduction Solvent: CP-9 and CP-17 Thinner
Clean-up Solvent: CP-9 Thinner
Specific Gravity: 1.26kg/l, varied with colors
VOC(EPA24): 378g/l, varied with colors
Solid by Volume: 56%, Theoretical, varied with colors
Theoretical Coverage at 1.0 Mil Dry: 17.5m2/kg
Recommended Film Thickness: 2.0-3.0 mils(50-75 microns) dry; 3.6~5.4 mils(90-135 microns) wet.
Substrate Temperature | 4 | 16 | 27 |
Minimum Recoat Dry Hard Maximum Recoat | 10 Hours >32 Hours | 6 Hours 24 Hours | 3 Hours 16 Hours |
Self | 2 Weeks | 2 Weeks | 2 Weeks |
Ventilation, film thickness, humidity, thinning, and other factors can influence the rate of dry.
