PP/PE Waste Plastic Film Crushing Washing &Drying Recycling Line
The process of this automatic production line for plastic crushing and washing is as following: Plastic raw materials conveyin
Waste plastic recycle line.
QTY.(Unit) | Description |
1 | Lifting Conveyor |
Working Length: 4500mm | |
Light Rubber Conveying Belt: 600mm wide | |
Conveying Speed: 8-15m/min | |
Motor: 1.1kw | |
1 | PC 800 Crusher (with water) |
Motor: 30kw | |
Feeding Mouth: 800×560mm | |
Diameter of rotor: 560mm | |
Speed of rotor: 580rpm | |
Rotator: 8pcs | |
Stator: 4pcs | |
Material of Knife: W18Cr4V (W- series high speed steel) | |
There is over-load emergency switch. | |
The advantage of crushing with water: rough remove sand at the first step. | |
1 | Film Friction Washing Machine |
Motor: 11kw | |
Screw: 300mm | |
Diameter of mesh: 3mm | |
Screw Rotating Speed: 900rpm | |
Length: 3000mm | |
This machine has the self dirt-draining function. | |
The parts contacted the raw material are made of stainless steel. | |
Working Principle: | |
With the high speed rotating screw, the sand and soil dirt could be separated. | |
1 | Deposit and Float Washing Machine |
Washing Roller Motor I: 0.55kw | |
Washing Roller Motor II: 0.55kw | |
Dirt Collecting Motor: 1.5kw | |
Dirt Draining Motor: 1.5kw | |
Driving method: chain with speed reducer | |
Length: 4600m | |
Width: 1200m | |
High: 1760 mm | |
The parts contacted the raw material are made of stainless steel. | |
Function: It has the dirt collecting device can drain the dirt deposit at | |
the bottom of the washing tank. There are one pull forks and three pull drum, | |
which are rotating slowly, before the material was send to the dewatering | |
machine the dirty and soil was clean up absolutely. And the dirty and soil was | |
deposit at the bottom, there is a screw pull them to the discharge port, | |
then discharge them out | |
1 | Screw Feeder |
Motor power: 1.5kw | |
Diameter: 250mm | |
Effective Length: 2500mm | |
The parts contacted the raw material are made of stainless steel. | |
Function: Connected with deposit and float flume, when the | |
Material after Washing, all of material was drop into the screw feeder, and then | |
with the feeder helical rotating, the material was send to dewatering machine. | |
1 | Film Dewatering Machine |
Motor: 22kw | |
Rotating Speed: 1270rpm | |
Diameter of rotor: 700mm | |
Effective length of rotor: 1300mm | |
Diameter of mesh: 3mm | |
The parts contacted the raw material are made of stainless steel | |
1 | Pipe Drying System |
Heating Power: 45kw | |
Blower Motor: 5.5kw | |
The pipes are made of stainless steel and diameter is 159mm. | |
Function: The pipe was made of stainless steel; its shape is “U” flexible, | |
as the material out of dewatering machine, there is one blowers, and a | |
heating box, as the heat box generate heat, the blower absorb, so the material | |
was heat and it’s water content was removal, meanwhile material was | |
blew to the storage hopper | |
1 | Storage Hopper |
Volume: 0.5m³ | |
Diameter: 600mm | |
Height: 1000mm | |
The parts contacted the raw material are made of stainless steel. | |
PP/PE Waste Plastic Film Crushing Washing &Drying Recycling Line