waste plastic recycling plant 1,Q245R & Q345R 2,alarm system 3,pollution-free 4.auto welding
Advantages of the waste plastic recycling plant
1. The ability to recover valuable product and/or energy from wastes
2. The process is "greener with high technology solutions
3. The ability to reduce and eliminate deposal of scrap tires in landfills.
4. Helps to meet the country’s recycling philosophy and targets.
5. Reduces greenhouse gas production - helps meet Kyoto Protocol targets.
Reactor & Accessories
waste plastic recycling plant
Safety
1. With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak. Professional heating treatment and x-ray detection chamber are especially for welding.
2. Vacuum system will prevent oil gas from going back to reactor and causing accident.
3. Professional thermometer, pressure gauge and safety valve.
4. It is dangerous to burn exhaust gas (C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production.
Long service life
1. Material: Q245R/345R special steel plate, thickness 14-16mm
2. Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.
3. The service life of the reactor will be 5-6 years
Energy saving:
1. Well sealing for heating system, no gas leak and saving fuel.
2. The exhaust gas will be recycled for reactor heating.
Technical Parameters of waste plastic recycling plant
ITEM | CONTENT | ||
equipment’s model | XD-06 | XD-08 | XD-10 |
Daily Handling capacity | 6 tons | 8 tons | 10 tons |
Door's model | Semi-open door | Semi-open door | Semi-open door |
Structure Form | Horizontal type | Horizontal type | Horizontal type |
Raw material | Waste rubbers/tyres/plastic | Waste rubbers/tyres/plastic | Waste rubbers/tyres/plastic |
Material of reactor | Q245R thickness 14mm | Q245R thickness 14mm | Q245R thickness 14mm |
Main engine rotating speed | 0.4R /min | 0.4R /min | 0.4R /min |
Power | 10-15KW | 10-15KW | 10-15KW |
Cooling Mode | Water | Water | Water |
Consumption of Cooling water | 0.2 | 0.3 | 0.4 |
Heating Mode | Direct | Direct | Direct |
Installation | Main engine integral installation | Main engine integral installation | Main engine integral installation |
Noise dB (A) | <=85 | <=85 | <=85 |
Machine dimension(mm) | D2000*L6000 | D2200*L6600 | D2600*L6600 |
Working Mode | Intermittent | Intermittent | Intermittent |
waste plastic recycling plant
XD-05CAP PE/PC/PET waste plastic recycling plant
