Waste Plastic Recycling 1.Using stainless steel. 2.Recycling an washing PET flakes 3.Easy Operation
Waste Plastic Recycling (500kg/h)
Item | Name | Specification |
1 | Belt conveyer | 1.5kw |
2 | Label separater machine | 22kw |
3 | Sorting table and metal detector | 2.2 kw |
4 | Belt conveyer | 1.5 kw |
5 | Crusher | 45kw |
6 | 380 Screw loader | 2.2kw |
7 | Hot washer | 7.5kw |
8 | 380 Screw loader | 2.2 kw |
9 | Friction washer | 11kw |
10 | 380 Single screw rinsing washer | 4kw |
11 | Screw loader | 2.2kw |
12 | 380 Single screw rinsing washer | 4kw |
13 | Screw loader | 2.2kw |
14 | 380 Single screw rinsing washer | 4kw |
15 | Screw loader | 2.2kw |
16 | Centrifugal dewaterer | 7.5 kw |
17 | Pipe drying system | 30 kw+7.5kw*2 |
18 | Air Label separator | 4 kw |
19 | Storage bunker | 1 m3 |
20 | Elactrical equipment | Siemens |
1. Raw material & Final product:
Raw material & formulation | Post-consumer bottles PET |
Final product & Output capacity | 500kg/h |
Description of final product | 1. Moisture: max 3% 2. Bulk density: 0.3G/CM3 3. Particle size: 10-14mm (can be designed as per special requirement) |
2 Work condition:
Warehouse/Workshop | Dimension (M*M*M): 35(L)×2.5(W)×3(H); If your workshop is small, you can turn the machine around. |
Power supply & Installation power | 3-phase, 380 V, 50 Hz; (can do as customer's request) |
Wire/cables(provide by customer) | Wires/cables from power supply to control cabinet of this production line; all electrical cables from control cabinet to each machine. |
Water supply hose/pipe(provide by customer) | Water supply to machines and pools |
3. Energy consumption:
Installation power | 164KW ( normally electricity power consumption is 70% of the total power, about 115kw ) |
Water supply | Consumption: ~12 tons per hour water circulation supplying required Pressure: 0.6Mpa |
Manpower | 6-8 Persons |
Plastic recycling and washing line