small-sized plastic injection molding machine,it is available for smal-sized plastic products or some small plastic fitting
Injection machinery (SZ-5500A)
Technical Parameter | ||||
Item | Unit | Parameter | ||
INJECTION UNIT |
|
| ||
screw diameter | mm | 80 | 85 | 90 |
screw L/D ratio | L/D | 22.3 | 21 | 19.8 |
theoretical shot volume | cm*3 | 2141 | 2418 | 2710 |
shot weight(ps) | g | 1948 | 2200 | 2466 |
injection pressure | Mpa | 188 | 167 | 149 |
theoretical injection rate | g/s | 427 | 482 | 541 |
plastic capacity | g/s | 80 | 100 | 118 |
CLAMPING UNIT |
|
| ||
max.clamping force | KN | 5500 | ||
max.opening stroke | mm | 820 | ||
space between tie bars | mm | 810x810 | ||
mould height | mm | 350-820 | ||
max.daylight | mm | 1640 | ||
OTHER |
|
| ||
pump motor power | KW | 55 | ||
pump pressure | Mpa | 16 | ||
heating power | KW | 33 | ||
size | m | 8.4x2.2x2.6 | ||
net weight | t | 23.5 | ||
oil tank capacity | L | 1000 | ||
| plastic injection molding machine | Technical Data |
| Model No.: | RJ-80 |
| Injection unit | |
| Screw diameter: | 35/40mm |
| Injection pressure: | 166/130MPa |
| Swept volume: | 114g(4 OZ)/154g(5.4 OZ) |
| Screw L/D ratio: | 21:1/19:1 |
| Screw stroke: | 135mm |
| Screw speed: | 0-200r.p.m |
| Shot stroke: | 200mm |
| Clamping unit | |
| Clamping force: | 800KN(80T) |
| Space between tie bars: | 355mm*315mm |
| Clamping stroke: | 280mm |
| Mould thickness(Min/Max) | 125/370mm |
| Ejector stroke: | 60mm |
| Ejector force: | 27KN(2.7T) |
| Power/heating unit | |
| Hydraulic system power: | 14MPa |
| Pump motor power: | 7.5KW |
| Heating power: | 7.0KM |
| Temp. control zones: | 2+N |
| Others | |
| Dimensions(L*W*H): | 3.6m*0.82m*1.5m |
| Weight: | 3.0T |
Injection machinery (SZ-5500A)
