Plastic Injection Molding Machine BL120EK 1. Clamping Force:1200kn 2. Injection Weight:190-295g 3. CE certificate
Servo Motor Energy-Saving Plastic Injection Molding Machine Model: BL120EK
Feature Specifications
Machine Type | BL120EK | |||||
Injection Unit | International specification | UNIT | 430/1200 | |||
Screw diameter |
| A | B | C | ||
mm | 36 | 40 | 45 | |||
Screw ratio |
| 23 | 20 | 18 | ||
Theoretical injection capacity | cm3 | 205 | 255 | 320 | ||
Shot weight(PS) | g | 190 | 235 | 295 | ||
oz | 6.6 | 8.2 | 10.3 | |||
Injection piston speed | mm/s | 106 | ||||
Injection rate | g/s | 100 | 123 | 155 | ||
Injection pressure | Mpa | 211 | 171 | 135 | ||
Injection stroke | mm | 200 | ||||
Max. Screw speed | r/min | 200 | ||||
Clamping Unit | Clamping force | Ton | 122 | |||
kN | 1200 | |||||
Opening stroke | mm | 420 | ||||
Space between tie bar | mm×mm | 460×410 | ||||
Min. mould height | mm | 180(145) | ||||
Max. mould height | mm | 460(425) | ||||
Max. distance Platen | mm | 870 | ||||
Ejector stroke | mm | 120 | ||||
Ejector force forward | kN | 38 | ||||
Ejector force back | kN | 27 | ||||
Number of ejector bar | PC | 5 | ||||
Electric Power
| Sys. Pressure | MPa | 16 | |||
Pump Motor | kW | 11 | ||||
Heater power | kW | 9 | ||||
Others |
| Number of temp. control zones | 3+1 | |||
Oil tank capacity | L | 180 | ||||
Machine dimensions(L×W×H) | m×m×m | 4.2×1.2×1.9 | ||||
Machine weight | Ton | 4.5 |
Servo Motor Energy-saving Plastic Injection Molding Machine BL120EK