Detailed Product Description
(injection moulding machinery)Characteristics of XT series
(1)Injection an mode-locking vertically, impact, facility, precision, it is suitable forinjection of small and middle pre-buried part.
(2)Double-cylinder injection system, high injection pressure, quick injection speed, it is the best selection for the part molding.
(3)Mode-locking directly. The xounter of stress is uniform. The precisely protection of lower power supply. Full stroke is liquidity and excellent.
(4)The slide and rotary type machine can be conbined according to the characteristics of buried part(s) ensure to make your marwfacturing more efficient and cost-saving.
(5)Being adapted expandable program design and automatic buried taking.
Main Technical Parameters:
Name of item | Unit | XT-600 | |||
Injection Uint | |||||
Screw Diameter | mm | 35 | 40 | 45 | 50 |
Injection Pressure | kg/cm² | 2577 | 1937 | 1559 | 1263 |
Theoretical Shot Volume | cm³ | 173 | 226 | 286 | 353 |
Theoretical Shot Weight (PS) | g/OZ | 158/5.6 | 206/7.3 | 261/9.3 | 321/11.3 |
Injection Rate | cm³/sec | 87 | 114 | 144 | 177 |
Temperature Control Areas | ZONE | 5 | |||
Hopper Capacity | L | 30 | |||
Camping Unit | |||||
Clamping Force | T | 120 | |||
Opening Force | T | 15 | |||
Space between tie bars | mm | 620*280 | |||
Min. mould thickness | mm | 250/200 | |||
Opening Stroke | mm | 250 | |||
Max. Open Daylight | mm | 500/450 | |||
Ejector tonnage | T | 3.3/3.5 | |||
Ejector stroke | mm | 75/145 | |||
Sliding table size | mm | 840*500 | |||
Sliding table stroke | mm | - | |||
Hydraulic Pressure and Power System | |||||
Max Hydaulic Pressure | kg/cm² | 140 | |||
Pump Output | L | 200 | |||
Hydraulic pump Moto | kw | 14.7 | |||
Heater capacity | kw | 7.5 | |||
Total Wattage | kw | 22.2 | |||
Others | |||||
Machine weight | T | 4.9/5.2/5.4 | |||
Dimensions | m | 2.4*1.6*3.1 | |||
