Detailed Product Description
Features of PET bottle Injection Molding Machine model ONLY-96PET (96cavities PET preform production line)
welcome to vist our factory!
1.ONLY-96PET Injection Molding Machine is specially designed for 96 cavities of PET bottle mould,with the cycle of 12 seconds and the capacity of 28800pcs/h.
2.The design of dual-screw structure greatly reduce the cycle time and ensure a high productivity by synchronizing the material melting with the injecting.This structure also greatly improve the plasticization and lower the AA value and IV value of the product to an extremely low level so as to keep the original food taste.
3.The fully enclosed structure in appearance and the fully hydraulic structure in system keep a clean working environment free of dust,oil and noise.
4.The adoption of closed loop hydraulic control system in claming unit and injection unit ensure high efficiency and good quality of the product.
5.All the main components of the injection system are made of alloy steel and proceeded by special treatment to ensure less mechanical abration and the longevity of the machine.
6.The adoption of SIEMENS PLC controling system realize the one-to-one temperature control for every single cavity to ensure stable hot-runner temperature so as to effectively decrease the content of Acetaldehyde.
Parameter List
| Model | PET630-96 | ||
| INJECTION UNIT | Screw Diametermm | 120 | |
| Screw L/D Ratio | 25 | ||
| Screw Speedrpm | 80 | ||
| Plasticizing Capacityg/s | 380 | ||
| Shot Volume (PS)cm3 | 4568 | ||
| Shot WeightgPET1.2 | 5480 | ||
| Shot PressureMPa | 126 | ||
| Shot Speedcm3/s | 2280 | ||
| CLAMPING UNIT | Clamping ForcekN | 6300 | |
| Distance Between Tie Rods (WxH)mm | 1000×1100 | ||
| Clamping Strokemm | 1500 | ||
| Close Daylightmm | 350 | ||
| Max.Daylightmm | 1850 | ||
| Ejector ForcekNCenter | 160 | ||
| Ejector ForcekNFour Auxiliary Cylinders | 450 | ||
| Ejector StrokemmCenter | 220 | ||
| Ejector Stroke (mm) (Four Auxiliary Cylinders) | 35 | ||
| The Number of Ejector Pole | 19 | ||
| CONTROL SYSTEM | System PressureMPa | ||
| Pump Motor PowerkW | 185 | ||
| Screw Heating PowerkW | 85.5 | ||
| Mould Heating PowerkW | 90 | ||
| Temperature Range0400 | |||
| Mechanical Hand PowerkW | 30 | ||
| MOULD | The Number of Cavities | 96 | |
| Max. Preform Length (mm) | 220 | ||
| Max. Neck (mm) | |||
| Max. Preform Weight (g) | 40 | ||
| Mould Structure | |||
| OTHER EQUIPMENT | Mechanical Hand | ||
| Freezing Water | Temperature | ||
| PressureMPa | |||
| Flow (L/min) | 1200 | ||
| Cooling Water | Temperature | ||
| PressureMPa | |||
| Flow (L/min) | 300 | ||
| Compressing Air | PressureMPa | ||
| Flow (L/min) | 1600 | ||
| OTHER | Machine Size (m) | 11.8×4.6×2.8 | |
| Machine Weight (t) | 40 | ||
more details about our PET bottle injection molding machines,please turn to our homepage or contact us by email .
