PET Bottle Injection Moulding Machine
Detailed Product Description
PET Bottle preform Injection Moulding Machine:
Please refer to the following data for our PET bottle injection moulding machine.
we can make PET preform injection moulding machine with up to 96cavities. 48cavities with cycle time 8seconds. on this 48cavities,to make 17grams preform,can be 21600pcs per hour capacity.
technical parameters:
| Model | PET330-48 | PET450-72 | PET630-96 | ||
| INJECTION UNIT | Screw Diametermm | 100 | 110 | 120 | |
| Screw L/D Ratio | 25 | 25 | 25 | ||
| Screw Speedrpm | 80 | 80 | 80 | ||
| Plasticizing Capacityg/s | 220 | 280 | 380 | ||
| Shot Volume (PS)cm3 | 2198 | 2945 | 4568 | ||
| Shot WeightgPET1.2 | 2640 | 3533 | 5480 | ||
| Shot PressureMPa | 120 | 100 | 126 | ||
| Shot Speedcm3/s | 1220 | 1636 | 2280 | ||
| CLAMPING UNIT | Clamping ForcekN | 3300 | 4500 | 6300 | |
| Distance Between Tie Rods (WxH)mm | 670×780 | 790×780 | 1000×1100 | ||
| Clamping Strokemm | 1180 | 1250 | 1500 | ||
| Close Daylightmm | 320 | 350 | 350 | ||
| Max.Daylightmm | 1500 | 1600 | 1850 | ||
| Ejector ForcekNCenter | 160 | 160 | 160 | ||
| Ejector ForcekNFour Auxiliary Cylinders | 140Two Auxiliary Cylinders | 290 | 450 | ||
| Ejector StrokemmCenter | 220 | 220 | 220 | ||
| Ejector Stroke (mm) (Four Auxiliary Cylinders) | 35 | 35 | 35 | ||
| The Number of Ejector Pole | 7 | 9 | 19 | ||
| CONTROL SYSTEM | System PressureMPa | 14.5 | |||
| Pump Motor PowerkW | 120 | 120 | 185 | ||
| Screw Heating PowerkW | 65 | 75 | 85.5 | ||
| Mould Heating PowerkW | 50 | 70 | 90 | ||
| Temperature Range0400 | One-to-one Control | ||||
| Mechanical Hand PowerkW | 10 | 15 | 30 | ||
| MOULD | The Number of Cavities | 48 | 72 | 96 | |
| Max. Preform Length (mm) | 190 | 220 | 220 | ||
| Max. Neck (mm) | 42 | ||||
| Max. Preform Weight (g) | 40 | 40 | 40 | ||
| Mould Structure | Pneumatic Pin Valve Hot-runner | ||||
| OTHER EQUIPMENT | Mechanical Hand | Three Station Fetching System | |||
| Freezing Water | Temperature | 515 | |||
| PressureMPa | 0.45 | ||||
| Flow (L/min) | 600 | 900 | 1200 | ||
| Cooling Water | Temperature | <25 | |||
| PressureMPa | 0.25 | ||||
| Flow (L/min) | 200 | 300 | 300 | ||
| Compressing Air | PressureMPa | 0.70.9 | |||
| Flow (L/min) | 800 | 1200 | 1600 | ||
| OTHER | Machine Size (m) | 8.9×4.0×2.5 | 10×4.3×2.6 | 11.8×4.6×2.8 | |
| Machine Weight (t) | 25 | 33 | 40 | ||
