The Zs130 servo motor injection molding machine is 1.Energy saving 2.Ultimate response 3.Ultimate precision repeatabilit
small injection moulding machine zs130 is
ZS130Technical Specification | ||||
Description | Unit | A | B | C |
Shot volume | cm³ | 182 | 238 | 301 |
Shot weight | g | 171 | 225 | 283 |
oz | 6 | 8 | 10 | |
Screw diameter | mm | 35 | 40 | 45 |
Injection pressure | mpa | 212 | 162 | 128 |
Screw I/D ratio | 23:1 | 20.5:1 | 18:1 | |
Screw stroke | mm | 190 | ||
Screw speed(stepless) | rpm | 0-200 | ||
Clamping force | kn | 1200 | ||
Opening stroke | mm | 360 | ||
Platen size | mm x mm | 590 x 590 | ||
Space between tie bars | mm x mm | 410 x 410 | ||
Max daylight | mm x mm | 810 | ||
Mold thickness(min-max) | mm | 145-450 | ||
Hydraulic ejection stroke | mm | 120 | ||
Hydraulic ejection force | kn | 34.3 | ||
Ejector pin | 4+1 | |||
Hydraulic system pressure | mpa | 17.5 | ||
Pump motor | kw | 12 | ||
Heating capacity | kw | 8.86 | ||
Number of temp control zones | 4 | |||
Oil tank capacity | L | 160 | ||
Machine dimensions | m x m x m | 4.21x 1.13x1.95 | ||
Machine weight | kg | 3500 | ||
It uses the Japanese YUKEN/high response proportion variable displacement pumb,the movementt speed of response is quick,leading the proportioning pumb output displacement in a big way compared to the similar power electrical machinery 15% - 20 %..
2,Environmental protection
Because it will not have the overflow to give off heat,the hydraulic pressure oil cooling water demand will only need the proportioning pumb machine 45%-65%.The good oil cleanliness control makes the hydraulic fluid live longer and the life is fiveyears longer under the normal use.
3.Power-saving
It can save the electricity from 30 %to 75%,compared to the ordinaty proportioning pumb machine.
4.Reliable
Resuction of oil temperature reduction lengthens the seal life greatly,and it is joined to the oil clean system whichs designs specially,filtering the greasy dir fast,guaranteeing the hydraulic system long-term reliable wok
5..Low noise
The rational design of the hydraulic control,the integration rate is high,and itpresses the loss to be small,reducting noise processing to make the complete machine movement steady uniquely tranquil.
6.Quality
We sdopt the famous brand electronic rulers,which are made in Germany,Italian.
The operating temperature scope is wide :-32±100degrees Celsius.The part and the material careful coice enables the sensor to have the extremely low temperature,the firm structure and the protection sensor suit in the bad environment use.The displacement operating lever undergoes the special surface treatment,which can reduce the friction to adapt to the high speed movement.
7.Quality assurance(ML6117)
1)Multi-language display(chinese and English are standard languages,custormercan add a third language when needed)
2)Intellingent SPC control
3)Long-disrance machine monotoring by internet
4)Dynamic graphic display of temperature
5)Alam record and data revision record
6)Auto-tune PID tempreture control
7)IO extension
8)Pre-heating or heat guarding function
9)Data-locking function
10)Screw cold start prebention
11)linear adjustment of accelerated
12)Decelerated RRMP
8.Camping unit
1)Strong or strenghthen platen design ensuring miuimun deformation.
2)High tensile platen with even force distribution,less deformation,enabling precision clamping.
3)Fast speed regenerative clamping function to meet woth special movement requirement.
4)Automatic mold adjustment by pressure and position for more convenience change of mold.
5)Low pressure mold protection.
6)Multi ejector mode for choice.
6)High precision imported linear transducer for clamping and ejection.
ZS130 injection molding machine
