PET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle ... PET preform plastic injection machinePET preform for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others. 1.Special injection construction designed to benefit for plasticizing. 2.By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm. 3.By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ±1°C. 4. Microprocessor controller with 4 stages injection, 3 stages holding pressure. 5. Shut-down memory is able to store up to 100 preset mold data memory.6.Higher stability and lower defect in PET preform dimension
| Specofocation | Unit | ALL218 |
| injection unit | ||
| screw diameter | mm | 55 |
| screw l/d ratio | L/D | 25 |
| shot volume(theoretical) | cm | 449 |
| shot weight | g | 449 |
| injection pressure | mpa | 144 |
| injection speed | mm/s | 98 |
| screw speed | rpm | 0-180 |
| clamping unit | ||
| clamping force | KN | 2180 |
| toggle stroke | mm | 470 |
| space between tie bars | mm | 515X515 |
| max.mould height | mm | 530 |
| min.mould height | mm | 200 |
| ejector stroke | mm | 130 |
| ejector force | KN | 62 |
| ejector number | PG | 5 |
| others | ||
| max.pump pressure | Mpa | 16 |
| pump motor power | KW | 18.5 |
| heater power | KW | 13 |
| machine dimensions(LXWXH) | m | 5.8X1.34X2.27 |
| oil tank capacity | L | 280 |
| machine weight | Ton | 6.7 |
PET perform plastic injection machine
