1,width:10mm-500mm(e.g.:10mm,15mm,20mm) 2,thickness:30um-40um 3,used in winding forming operation;compression molding
property
1.thermal stability;
2.low heat shrinkage in certain temperature range;
3.good tensile strength;
4.flawless and glossy surface;
5.improve wetting tension provides clean release.
application
used in winding forming operation;compression molding
such as carbon fiber stick,fishing rod,golf rod,etc.
widely used informing every kinds of shafts and reinfor.
Specification
Property | Unit | Test Method | BOPP-1 | BOPP-2 | |
Thickness | um | ---- | 30-35 | 38-40 | |
Tensile Strength | Vertical MD | kg/mm2 | ASTM-D882 | 19.6 | 19.3 |
Horizontal TD | 27.8 | 28.6 | |||
Break Elongation | Vertical MD | % | ASTM-D882 | 133 | 126 |
Horizontal TD | 67 | 50 | |||
Heat Shrinkage | Vertical MD | % | ASTM-D1204 | 3.2 | 2.9 |
Horizontal TD | 1.3 | 0.4 | |||
Wetting Tension | INSIDE | Dyn/cm | ASTM-D2578 | less33 | less33 |
OUTSIDE | less33 | less33 | |||
Haze Level | % | ASTM-D1003 | 1.3 | 1.3 | |
Gloss Level | 600 | ASTM-D2475 | 150 | 150 | |
good tensile strength BOPP wrap film
