ABA 3-Layer Blown Film Extruder Produce both HDPE and LDPE film. Good physical toughness Energy saving and high output
ABA 3-Layer Blown Film Extruder
Model:
SJ55*30+SJ55*30-FMS1200(A+B+A), SJ45*28+SJ55*30-FMS800(A+B+A)
ABA 3-Layer Blown Film Extruder enjoyes special advantages and can produce both HDPE film and LDPE film.It improves the physical toughness of film through multi-layer co-extrusion. With one main extruder providing material for outer and inner layers, it reduces one main extruder configuration and achieves energy saving and low consumption.
Technical parameter:
Specification Model | SJ55×30+SJ55×30 -FMS1200(A+B+A) | SJ45×28+ SJ55 ×30-FMS800(A+B+A) |
Screw Diameter(mm) | AØ55/B Ø55 | AØ45,BØ55 |
Screw Ratio(L/D) | 30:1 | 28:1&30:1 |
Heater Capacity(kw) | 30 | 20 |
Driving Motor Power(kw) | A18.5/B22 | A15/B18.5 |
Temperature Controller Panel(zone) | 11 | 11 |
Take-up Roller With (mm) | 1200 | 800 |
Take-up Power(kw) | 0.75 | 0.75 |
Take-up Speed(max.m/min) | 0-80 | 0-80 |
Die Diameter(mm) | (Ø)120(A+B+A) | (Ø)100(A+B+A) |
Air Blower Power(kw) | 4 | 4 |
Film Width (mm) | 400-1000 | 240-700 |
Film Thickness(mm) | 0.02-0.10 | 0.02-0.10 |
Extrusion Output (kg/h) | 100 | 90 |
Assembling Dimension(L×W×Hm) | 6×3×6 | 5×2×5 |
All these technical parameters can be varied with customers’ request. No further notice for any variation. | ||
Optional equipment:
1.Autoloader
2.Corona treatment
3.Air compressor
4.Air-cooled chiller
5.Rotary die
Product show
This picture is only for reference purpose, the final machinery model is subject to customers’ need.
ABA 3-Layer Blown Film Extruder
