good quality product: smooth surface; very round; cut precisely good capacity: about 140kg/hr save power
Please check the specification:
Hot reactor: one
Model: 200L
Vessel material: stainless steel
Electrical control box: one
(It is necessary to buy at least 2 sets of this kind of mixers)
Steel stand: one set
2. AF-120 hot melt glue sticks extrusion line configuration and quotation:
Extruder: one
a. Screw:
Screw structure: special
Diameter: 120mm D/L : 15:1
Material: 38CrMoALA alloy steel
Treatment: Nitrified, electroplated hardness chrome. Nitration depth: 0.3-0.7mm; fragility is 2 grades.
The tube( barrel):
Fixed with one water cooling system (water jacket)
Material: 38CrMoALA alloy steel
Treatment: Nitrified, electroplated hardness chrome. 40HV; Nitration depth: 0.4-0.6mm; fragility is 2 grades.
Driving devices:
Motor power: 11kw
Taiwan’s Delta transducer controller
High precise worm-wheel gearbox provides low noise and high effectivity.
Heating sections: 4
Electric control box: one
Extrusion mould with two head channel: one (according to customers requirement)
Cooling water trough: one
Length: 16m
Material: stainless steel
Water through stand: two
Two wheel Haul-off unit: one
Control power: 0.75kw
Control style: frequency conversion
Haul-off and automatic cutting machine: one
Control power: 0.75kw
control style: frequency conversion
Cutting motor: 0.75kw
control style: frequency conversion
Extrusion capacity: 140kg/hr-200kg/hr
10HP water chiller: one
Cooling capacity: 25200 kal/h
Water pump power: 1HP
Chiller water flow rate: 95L/MIN
(To get norm production, please choose a water chiller)
2012 hot melt glue granule production line
