Features: Extended clamp opening stroke to meet special molding requirements
Plastic machinery
Features: 1) Extended clamp opening stroke to meet special molding requirements2) With high speed and high pressure injection capability, is suitable for highprecision and thin wall molding products3) Four-stage of injection speed, three-stage of holding pressure4) Four-stage of metering phase can be setup according to products' requirements5) Linear position transducer is used for clamp, screw, ejector and carriagestroke measurement with 0.1mm resolution 6) Super silence hydraulic circuit design
GM3400 | A | B | |
| |||
INJECTION UNIT |
|
| |
SCREWD IAMETER | mm | 65 | 75 |
DRAWRATIO OF SCREW |
| 20.7 | 18 |
Theoretical Shot Volume | cm3 | 978 | 1303 |
Injection Weight | g | 890 | 1162 |
Injection Rate | g/s | 288 | 384 |
Plasticizing Capacity | g/s | 32.9 | 43.8 |
Injection Pressure | Mpa | 170 | 128 |
Serew Speed | r/min | 0200 | |
CLAMPING UNIT |
| ||
Clamp tonnage | KN | 3400 | |
Toggle stroke | mm | 620 | |
Space Between Tie Bars | mm×mm | 665×665 | |
Space between tie-bars(MIN-MAX) | mm | 250-680 | |
MAX.Daylight | mm | 1300 | |
Ejector Stroke | mm | 185 | |
Ejector tonnage | KN | 70 | |
Ejector Number | Piece | 5 | |
GENERAL |
| ||
System Pressure | Mpa | 14 | |
Pump motor Power | KW | 30 | |
Heater power | KW | 17.8 | |
××MACHINE DIMENSIONL×W×H | m | 6.7×1.8×2.0 | |
Machine Weight | T | 12 | |
Oil Tank Capacity | L | 700 | |
Shanghai GS(GuangSu) Machinery Manufacture Co.,Ltd
AddNo.888,Kungang Rd, Songjiang Sci.& Tech. Park, Shanghai,ChinaTel +8621-5785 0702; 5785 0726; 5785 0727Fax +8621-5785 0725
P.C 201614
Plastic Machinery
