EBM-50 Automatic Extrusion Blow Molding Machine

Technical Parameter

General parameter

Nominal capacity

3000-3200 bottles/hr  (200ml, 17g PE bottle)

Capacity is subject to bottle type, weight to great extent.

Screw diameter

Φ65mm  (Adjustable upon products)

Length/dia. ratio of screw

24:1

Revolution of screw

18-86rpm

Max. plasticization

50-65kg/h  (PE)

Mold locking force

50kN

Mold head quantity

Single mold head, two mold heads, three mold heads, four mold heads, six mold heads  (adjustable upon products)

Mold cavities of one side

Single cavity, two cavities, three cavities, four cavities, six cavities  (adjustable upon products)

Total power

56.7kW

Heating sections of barrel

4 sections

Heating power of barrel

15kW

Screw driving motor power

22.0kW

Mold head heating power

14.2kW

Oil pump motor power

5.5kW

Running power

20-27kW  (Subject to different products)

Overall dimension

3300mm×3300mm×2500mm  (L×W×H)

Power source

3N+PE  50Hz  380V/220V  (Three-phase five-wire)

Subject to adjustment according to the end-use country

Outsourcing power requirement

Blowing pressure

0.8MPa

Compressed air consump.

60m³/h

Air source purification

Class 100,000

Cooling water temp.

10-20  (PE)

Cooling water consump.

2.0m³/h

Attached accessories

--

Water cooling machine: water output temperature 10-15, pressure 0.2-0.4MPa, flowrate 65L/min

--

Air compressor: pressure 1MPa, flowrate 5m³/h

--

Vacuum material feeding machine: 200kg/h

--

All attached accessories should be purchased separately