Automatic stretch blow molding machine For ordinary preforms,the machine can runs full automatically with preform auto-loader.
Automatic stretch blow molding machine ZQ-M600-3
ZQ-M Series is Dual-purpose Automatic Blow Molding MachineBy structure optimization and technicial innovation, Cost-effective ZQ-M series of blowing machines have been developed on the basis of ZQ-A series of PET bottle blowing machine.ZQ-M series PET blowing machines are double-purpose blowing machines. According to different tpes of preforms,users can choose different operation method flexibly. For ordinary preforms, the machine can runs full automatically with preform auto-loader. For special preforms, they will be loaded manually. Its multiple use and low cost will save you much.ZQ-M series of blowing machines can produce different shapes of 0.6L, 1.5L, 5L and 10L carbonated, mineral, pesticide, cosmetics, wide-mouth and other plastic PET/PP containers. They have all the advantages of ZQ-A series of blowing machines: Low rejection rate, high speed,stable running and easy operation.FeaturesA. Stable performance with advanced PLC.B. Conveying preforms automatically with conveyor.C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.H. Strong clamping force with high pressure and double crank links to lock the mold.I. Two ways of operating: automatic and manual.J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
| TYPE | ITEM | ZQ-M600 | ZQ-M600-2 | ZQ-M600-3 | ZQ-M1500 |
| CONTAINER | Number of cavity | 1 | 2 | 3 | 1 |
| Output | 1200-1500 pcs/hr | 2000-2300 pcs/hr | 3000-3300 pcs/hr | 1000-1200 pcs/hr | |
| Max.container volume | 0.6L | 0.6L | 0.6L | 1.5L | |
| Max.neck diameter | 48mm | 48mm | 48mm | 48mm | |
| Max.container diameter | 60mm | 60mm | 60mm | 105mm | |
| Max.container height | 260mm | 260mm | 260mm | 350mm | |
| ELECTRICAL SYSTEM | Number of lamp | 14pcs | 28pcs | 32pcs | 28 pcs |
| Max.heating power | 9kw | 22kw | 32kw | 22kw | |
| Installation power | 12kw | 25kw | 35kw | 25kw | |
| Actual power consumption | 9kw | 14kw | 20kw | 16kw | |
| AIR SYSTEM | Operatating pressure | 7kg/cm² | 7kg/cm² | 7kg/cm² | 7kg/cm² |
| Low pressure consuming | 800Ltr/min | 1000 Ltr/min | 1200 Ltr/min | 900 Ltr/min | |
| Blowing pressure | ≤30kg/cm² | ≤30kg/cm² | ≤30kg/cm² | ≤30kg/cm² | |
| High pressure consuming | 1200-1600Ltr/min | 1500-2000Ltr/min | 2000-2500Ltr/min | 1200-1600Ltr/min | |
| CHILLER WATER | Operating pressure | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² |
| Temperatuer | 10°C | 10°C | 10°C | 10°C | |
| Consuming | 3600kcal/hr | 5600kcal/hr | 7600kcal/hr | 3600kcal/hr | |
| Flow rater | 20Ltr/min | 30Ltr/min | 40Ltr/min | 20Ltr/min | |
| MACHINE | Machine dimension | 2.5×1.4×1.7(m) | 2.9×1.55×1.8(m) | 3.4×1.4×1.8(m) | 2.9×1.7×1.85(m) |
| Machine weight | 1.7T | 1.8T | 2.1T | 1.8T |
Automatic stretch blow molding machine
