1.Japan Mitsubishi PLC programmable controller 2. English parameter process setting, state monitoring 3. blow molding machine
automatic extrusion blow molding machine
Explain:
YF-65A Full Automatic Extrusion Blow Molding Machine is one-step method, one-time molding, pneumatic, and features automatic cut. It is suitable for producing PP, PVC, PE, AS and other hollow plastic containers and bottles in all shapes from 5 ML to 5000 ML, This machine is widely used to produce the hollow plastic containers for foods, toys, beverage, medicines, chemical products, pesticides, detergent, etc. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble shooting, maintenance and other benefit. For its good quality and our perfect service, its your best choice to use it .YF-65A has one die head and two stations.
Characteristic
1. Control Unit: Japan Mitsubishi PLC programmable controller and touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts famous international brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
Technical parameter | ||
Model | YF-65A | |
Suitable materials | PE,PP,PC,PVC,AS | |
Theoretical Output | Depend on bottle design | 400pcs/h |
Max.product volume | 1 cavity or 2cavity | 4L or 2L |
Die Head Amount | Piece | 1 |
Work Station Amount | Piece | 2 |
Extrusion Unit | Screw Diameter | 65mm |
Screw L/D Ratio | 22:1/20:1 L/D | |
Screw Speed | 10-50 r/min | |
Plasticizing Capacity | 70kg/h | |
Mold Unit | 1 Cavity or 2 cavity 2 Set | 1 cavity 2 sets or 2 cavity 2 sets |
Max.Bottle Diameter | 130mm | |
Mold Thickness | 80-160mm | |
Mold Board Stroke | 170mm | |
Clamping Force | 100KN | |
Power Unit | Electrical source | 220-380V,3phase 50-60Hz |
Heating Power | 11KW | |
Motor | 15KW | |
Average Energy Consumption | 19KW | |
Air Pressure | 0.8MPa | |
Machine Size | L*W*H | 3000*2000*1900mm |
Machine Weight | 2200KG | |
Auxiliary Equipments | Low Pressure Air Compressor 1 set(requisite) | 1.6m³ /1.0Mpa/15kw |
Air Dryer 1 set(optional) | 1.0m³ /3.0Mpa/375W | |
Air Filter 2 set(optional) | 1.0m³ /3.0Mpa | |
ITEM | SPECIFICATION | DATA | SPECIFICATION | DATA | PRICE(FOB )FOBNINGBO |
QCM-65 full automatic stretch blow molding machine | container capacity | 1L/2L | Screw heating power(KW) | 10 | NOTE: 1. The data of the platen size and mold thickness is up to product. 2. The actually productive capacity is about 400 PCS for one hour(double station). (time is up to the product size and volume and mold) 3.the dry cycle means the machine just moving without blowing bottle. 4.the size of the machine will be adjusted for the product |
material | PE | Extruder driving power(KW) | 18 | ||
Number of die | 1 | Oil pump motor power(KW) | 5.5 | ||
No.of station | 2 | Max.power consumption (KW) | 35 | ||
Screw diameter(mm) | 65 | Platen size(LXW) | 300*306 | ||
Screw L/D ratio(l/d) | 24 | Stroke of mold board(mm) | 250 | ||
plasticizing capacity(kg/h) | 60 | Mold Thickness (mm) | 200-450 | ||
Die layer | 1 | Clamping force(KW) | 60 | ||
Number of die heating zone | 2 | Machine Size(mm) | 3200*2000*2500 | ||
Power of die heating (KW) | 5 | Gross Weight(kg) | 4500 | ||
Number of screw heating zone | 3 |
NOTE
We can make the mold according to your sample.Because this machine with double station,and it needs two molds on the machine.
welcome your contact incerely!
Automatic Extrusion Blow Molding Machine for bottle
