Welcome to ECBAY
TCJ650 Extruder
TCJ650 Extruder

This machine is used for making clay pipe, clay brick, roof tile, honeycomb ceramic, and so on.

one、equipment purpose and the range of using

This vacuum forming extruder is basic on the vacuum forming extruder TCJ350, and improved to the machine of can produce ceramic wide board equipment, and its extruding power is bigger and the products density is higher. You should use it with vacuum pump in normal in order to get rid of dirt in gas, and improve plastic of pug whisking screw and extruding screw are drive apart by frequency conversion stepless timing motor, you can control the speed of turn of whisking screw and extruding screw, it is fit for extruding different kinds of products, Extruding screw is easy to be removed, it is also fit for extruding different kinds of products.

Two 、main technical parameter

Data

Variable

Moisture of pug

16-21%

Capacity

5-6t/h

Rotate speed of stiring screw

≥12.8 r/min

Rotate speed of extruding screw

≥19.8 r/min

Diameter of extruding screw

φ280mm

Pressure of extudsion

≥3.5MPa

air clutch working press

0.5-0.8MPa

Vacuum degree

98kpa

Motor power

55kw

Overall size

About 4365×1950×1485mm

Net weight

  7500kg

TCJ650 Extruder

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.