Detailed Product Description
1The use of the products and performanceNot only does ductile iron have high tensile strength and percentage elongation,but also have fine ductility and other excellent as anti-high-compression,
Anti-oxidation,anti-corrosion,etc.so the ductile iron pipe fittings are widely applied to such compressive pipes as water pipeline.oil pipeline,gas pipeline,sand pipeline,sewerage pipeline etc
2. Product standards:All types of ductile iron pipe fittings produced by us according to ISO2531 BSEN545 EN598 BS4772 standards
3. Product export countries:Europe,South America,Africa,Middle East and South-East Asia,Their good quality has got a favorable appraisal from the end users.
4.Product Mechanical:Tensile strength>420mpa
Elongation>5%
Hardness<250HB
Proof Stress>300map
5.Product Microscopic Structure:ferrite+little pearlite grades of ductile lron>grade three(GB9941-88)
6.Type of joint:
.Push-on joint(Ttype) including Spigot end,EPDM&SBR rubber gasket,Anti-corrosive layer
Mechanical joint(Ktype)including spigot end,rubber gasket,anti-forrosive layer,T-bolts&nuts
Socket end
,flange joint(flange type)including flanged fittings,rubber gasket,flange-bolts&nuts.
7.Hydrostatic Test Pressure
Diameter:DN50-300 fittings 25 bar
Diameter:DN350-800 fittings 16 bar
8.flanged drilling standards:PN10&PN16&PN25&PN40,AWWA C110.
9. Surface treatmentfitting Internal epoxy powder coating External pink resin paint.Black Bitumen Coated or Blue Fusion Bonded Epoxy Coated as specified.
10.Internal lining: Cement Mortar Lined according to ISO 4179
11. Packing:Wooden pallets or wooden cases
The SCP range of Ductile Iron fitting to suit
Metric PVC pipe are available in sizes to suit
63mm315mm o/d PVC pipe. A simple socket
type joint, it is quick and easy to install
without requiring jointing force. The fittings
come ready to install with an EPDM gasket
already fitted in each socket.
Click image for technical data
This range of fittings is particularly competitive
when compared to manufactured PVC options.
The standard corrosion protection system is Blue Plascoat PPA571 to 250
microns, complying fully with BS 6920 and WRAS approved for use in potable
water pipelines.
The range fully complies with DIN 16 451:1994.
| Materials: | Steel, cast/ductile iron, stainless steel, concrete, asbestos cement, plastic, GRP and others. |
| Pipelines: | Onshore, offshore, transmission, distribution, water/waste water, plant piping, refinery, chemical plants, steel mills, power plants, steam lines, cooling systems and others. |
| Specs: | Designed and manufactured under ISO 9001:2000 WRC, WBS approved materials and coatings. Other coatings and rubber compounds available to suit a wide range of applications. |
