PH Meter, DDS Meter, TDS Meter, Multipara Meter.
A & E Lab.
Main Products: Atomic Absorption Spectrometer (AAS), Fluorescence Spectrophotometer, Bio-Spectrophotometer, UV Vis Spectrophotometer, Visible Spectrophotometer, Flame Photometer, Whiteness Meter, Turbidity Meter, Colorimeter, Gloss Meter, Tintometer, Automatic Polarimeter, Auto Melting Point Apparatus, Automatic Refractometer, Abbe Refractometer, PH/DDS/TDS Meter, etc.
ECscan series Waterproof Pocket Conductivity/oC Tester
ECscan series waterproof pocket conductivity/oC tester include the ECSCAN20, 30 and 40. The meters are used to measure electrical conductivity and temperature value of liquids with temperature compensation function (25oC).
Applications:
ECscan20 is used to measure low conductivity liquids.
E.g. Pure water, Distilled water etc.ECscan30 is used to measure general conductivity liquids. E.g. Tap water, Table-water etc. ECscan40 is used to measure high conductivity liquids. E.g. Waste water, Salt water etc.
Single Point Push-Button Calibration:ECscan series with single point calibration function. The meter is permitted to use standard conductivity solution, you need only set conductivity value of the calibration solution at 25oC and immerse conductivity electrode into conductivity solution, then press CAL key, the meter will be calibrated automatically.
Hold Function:When measure the sample solution, you need freeze reading temporarily for ease of recording. Waiting for a stable reading, press HOLD key, then the meter will hold the value.
Replaceable Electrode:ECscan series with platinum sensor, giving you quick, reliable conductivity measurement. Double junction sensor, you can replace it easily.
Automatic Temperature Compensation:
ECscan series with temperature sensor, you can view temperature throughoC key. The meter with automatic temperature compensation for accurate reading under changing conditions.
Auto-Power Off:The meter will turn itself off approximately 8 minutes after last key pressed, it saves battery power after non-use.
Waterproof Function:The meter with good waterproof performance, It can float on water.
Specifications:
Model | ECscan20 | ECsan30 | ECscan40 | ||
Conductivity Range | 0.0~199.9uS/cm | 0.0~1999uS/cm | 0.00~19.99mS/cm | ||
Conductivity Accuracy | ±1% F.S | ||||
Resolution | 0.1uS/cm | 1uS/cm | 0.01mS/cm | ||
Temp. Range | 0-80°C | ||||
Temp. Accuracy | ±1°C | ||||
Temp. Compensation | 0~50oC, Automatic | ||||
Calibration Points | 1 point (Digital, push-button) | ||||
Calibration Solutions | 146.6uS/cm | 1408uS/cm | 12.85mS/cm | ||
Operating Temp. | 0-60°C | ||||
Power Requirement | 3×1.5V alkaline button cell batteries | ||||
Battery Life | Approx. 150 hours | ||||
Dimension & Weight | 180(L)mm×30(Dia.)mm & 85g | ||||
Pocket Conductivity/oC Tester
