1, pH, moisture, light 2, Measures moisture, pH in root level 3, No batteries required
3 in 1 soil ph moisture light meter
FEATURES:
A. Hydrometer
Plant the probe shaft into the ground, at 3/4 of its length, between the pot and the plant. Then pick up the zone of color on the dial.
RED 1~3
Never add any water until the pointer is found in the first half of the zone. For the plants wouldn’t be too short of water.
GREEN 3~8
Add water once the pointer achieves at the second half of the zone.
Plants regularly require water.
BLUE 8~10
Don’t ADD ANY WATER, don’t water your plants.
B. Photometer
Put the photometer near the plant, the photo-eye toward the light source. Set the switch on the position of “light”. Not to mask the photo-eye, pick up the position of the pointer on the dial. For knowing the specific needs of your plants, consult a specialist.
C. PH meter
1. Prepare the earth sample for test:
Take away all the stones, cold, grass etc.
2. Tenderly clean the probe shafts with an abrasive soft paper and dry cloth or a toilet paper. Lightly wipe off the earth and then plant the probe. If the earth is too dry, wet it.
3. Remove the PH degree after 60 seconds.
D. Measures moisture, PH in root level
E. No batteries required
F. Promotes healthy plants
SPECIFICATIONS:
Test objects: sunlight, moisture, pH value.
Moist reading range: 0 DRY - 10 WET
Light reading range: 0 DARK - 2000 LIGHT
PH reading range: 8 ALKALIN - 3.5 ACIDIC
PICTURES:
Package
3 in 1 soil ph moisture light meter
