1K Metallic Effect auto paint-Strcarcoat series
Auto Paint: 1. High build 2. High solids 3. Good hiding power 4. Good weather resistance
Mix Ratio (by volume) | metallic auto paint: 1 part |
Thinner SCC-601 or SCC-602 or SCC-603: 1~1.2 part | |
Make a proper thinner proportion according to different temperatures | |
Pot life | 24hours@20degrees centigrade |
Spray gun & air pressure | gravity type 1.21.5 mm, |
suction type 1.41. 6 mm, 45Pa | |
Spray method | Spray 2~3 coatings, spray thickness: 15~25μm, Waiting Interval: 5∼10 minutes; After the final spray, wait 15-20 minutes before spraying a finish varnish. |
Drying Time | After 15 minutes at 20degrees centigrade, spray the varnish within one hour |
Substrate treatment | Wet-sand the middle-coating paint with 800-grit sand paper. When the paint is dry, spray metal colour primer. |
If the theres old paint film unsuitable for the substrate, it is suggested to use two-component middle-coating blocking primer, otherwise such phenomena as peeling off, bubling and floating would appear. | |
As the metallic paint has a high transparency, usually operators should ensure that the paint film of the middle-coating baking paint is unified in colour and has no sanding mark and grain on it, or the marks and grains would emerge through the metallic paint. | |
Shelf life | two years if sealed and kept in a cool and dry place. |
Packaging | 1L x 6 tins/ctn |
1K Metallic Effect auto paint-Strcarcoat series