Welcome to ECBAY
Gravure Inner Printing Ink(Alcohol-Solvent Ink)
Gravure Inner Printing Ink(Alcohol-Solvent Ink)

Alcohol-Solvent Printing Ink,it mainly can print OPP,PE,PA raw materials.Cold laminating PU glue.

CNINK (Chinese Ink)-Alcohol Solvent Ink 

Alcohol-soluble series of ink is an alcohol-soluble polyurethane composite ink, which independent and develop  in 2007 by Dongpeng Chemical Co Ltd  And it has a low odor, enviormental , low cost than benzene and ketone ink, widely be applicable for printing materials ,can be package printing for BOPP, PET, and NY.

Character:

1. No benzene ,no ketone  solvent ,main component is alcohol, low price and enviormental. 

2..Mlti-color printing, excellent dot reproduction 

3. Scraper  suitable ,suitable for long time printing.

Fitting film:

 

 Polyester(PET)  50   Dyne

 Nylon(NY)         52   Dyne

 Polypropylene   38   Dyne

 

 Diluent and Printing viscosity:

 

1,In normal printing condition, from full edition to half color printing ,Diluent should be 

   used for medium level ink.If use for slow drying solvent,pls attention for residual solvents solvent and sticky-dirty.

2. This series of ink’s viscory, color ink and white ink should be set about 13-18 second/ZC#3.

3.Attention: Dark printing and slow machine speed should be increased the viscosity for printing

Alcohol                          60                  50                 50

Acetic ether                   40                 20                 10     

N-propyl acetate                                30                 20                

Butyl acetate  

Cautions:

1.This series of ink cant be blend with other series of ink.

2,This series of ink is alcohol-soluble ink,because alcohol contain water, and easy to absorb water,if long-term of printing,,ink’s moisture will improve.It will impact ink’s printing effect.

Suggest if long-term printing or use old ink printing, should suitable for improving ester solvent’s proportion.

3,Acohol solvent is easy to absorbing heat of gasification, considate by the air’s water.Please attention, baking oven temperature should be set uo at t 50-70°C,and keep on the wind ,and easy to be dry.

placed in the drying room to ensure that it is thoroughly dry

4,After printing the film, before laminating, the printing film should be placed  for 8-16 hours , placed in the drying room to ensure that it is thoroughly dry.                 

5,The harder’s proportion must be enough in the polyurethane adhesive, it should be enlarge the harder’s proportion(5-20%). When it is wet weather., so that it can keep the adhesive solidify.

Gravure Inner Printing Ink(Alcohol-Solvent Ink)

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.