Welcome to ECBAY
Low Cost Manganese Brass Brazing Welding Strip
Low Cost Manganese Brass Brazing Welding Strip

1.High strength 2.Good hot ductility

HL105 has better strength materials than HS221. As a common material for hard metal, HL-S105 features high strength and low cost. It is widely used in brazing of cutters, saws, mine bit tools, and other high strength brazing.

HL105 has good flow wettability. Wettability makes a huge difference to welding performance. Manganese could improve wettability of filler metal in hard metal. 

HL105 has higher welding strength. Because of manganese and  minor iron in HL105, the shear strength of seam could be 200 to 300 MPa. In addition, HL105 has high temperature strength. The shear strength of HL105 could be 150-220 MPa in the surrounding of 320°C. So the carbide cutter and drilling tool brazed by our HL105 filler metal are suitable for long operation with high strength, and carry out all of they function. 

 

HL105 has good hot ductility. Hot ductility directly influence welding stress and quenching performance. Compared with HL62, the ductility of HL105 is twice increase. This if good for decreasing welding stress, and avoiding hard metal cracking.

 Item 

Number

Equivalent  to National Mark

 Chemical 

Composition (%)

 Temperature (°C)

Advantages and Usage

Melting 

Point

Recommended 

Temp.

HL105

BCu58MnZn

Cu:57-59 

Zn:Remain

Mn:3.7-4.3

Fe:0.15

880-910

910-960

1.Good fluidity 

2.High strength and plasticity

3.For hard metal cutter and saw

Low Cost Manganese Brass Brazing Welding Strip

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.