Hot air bga rework station/system LY R590, better than bga reballing station HT R490 newest
Laptop BGA rework station LY R590,NEWEST
A: the world's most advanced "intelligent control system" (Intelligent control system), referred to as "ICS", for BGA rework desoldering more humane, more simple, more intelligent.
B: super-failure alarm function, the control system integrated fault detection and alarm the following1: K-type thermocouple open alarm detection and fault protection. For temperature control, temperature overshoot and other faults no longer occur.2: up and down the hot air fan fault detection and fault alarm protection. Let the heater burning phenomenon in history, to maximize the protection of machines and personal safety.3: The heater fault detection and fault alarm, the machine's real-time status at a glance.
C: up and down the hot air flow speed of electronic intelligence. For each different temperature curves match different wind speeds, improve repair efficiency and improve the success rate of repair. Eliminating tedious repetitive traditional mechanical machine speed adjustment.
D: Y direction of the PCB with dual clamping frame, to meet the larger PCB fixed.
Basic functions:1 high-precision imported raw materials (PLC. heater) precise control of the BGA rework process.
2 The machine uses three independently controlled temperature zones, a more accurate temperature control of the first zone second zone can be set to 8 liters (down) and 8 segments constant temperature control, which can store 10 sets of temperature curve. third zone using warm, independent temperature control, to ensure that the PCB in the welding process can be fully preheated,
3 selection of imported high-precision thermocouple, the temperature precision to achieve detection.
4 using the top and bottom heating temperature of the heating curve way to go alone, cross-flow rapid cooling fan works to ensure that PCB in the welding process, is not deformed.
5 desoldering and soldering 20 seconds in advance of completion of progressive alarm, with a vacuum suction pen for easy desoldering suction times after the BGA.
6. PCB positioning using V-shaped slot, flexible and convenient removable fixture, the PCB has protective effects.
7 for large high-temperature heat capacity of PCB and other requirements, so you can easily handle lead-free solder.
8 hot air nozzle can be rotated 360 degrees, easy to replace. Hot air nozzle with a variety of sizes, special requirements can be customized. Motherboards for notebook computers, desktop computer motherboards, and other large circuit board repair, and other miniature mobile motherboard chip repair
1: Limit the heater head shot. (To prevent the heater head crushed PCB)2: Bellows3: heater head up and down adjustment handle. (Adjustable up and down position)4: LED lights. (Increase brightness of the work area)5: the upper heater to move the locking lever.6: head heater. (First zone)7: the upper part of the heater back and forth adjustment handle. (Position adjustable front and rear)8: head heater hot mouth. (Depending on the chip size can be replaced)9: lower heating and wind mouth. (Second zone)10: Tighten the screw-shaped plate fixture11: shaped plate fixture. (Clamping irregular PCB board, such as notebook panels)12: PCB clamping bracket. (Fixed with a clamping device PCB board)13: PCB clamping bracket locking screws. (PCB clamping bracket can be locked on the right)14: Power Switch15: lower preheating temperature zone (second zone) adjust the handle up and down16: suction17: suction pen (which can suck up the chip)18: display and control buttons. (Display parameters and setting parameters)19: Power Cord20: plywood fixture to move the locking screw21: cooling fan22: PCB thimble23: Infrared heating panels warm-up area. (Third zone)
Basic parameters of the machine
1 Power supply: single phase 220V & 110V AC 50/60HZ 4KVA2 Total Power: 4000W Upper heating power: 800W The bottom of the heating power: 800W, the bottom of the infrared heating power: 2400W. Standby power: ≤ 10W3 Temperature control: High-precision K-type thermocouple closed-loop control, with electronic temperature compensation.4.PCB positioning: V-groove shaped fixture + Z direction to adjust double-Y5 PCB size: MIN 10mm * 10mm MAX 350mm * 400mm6. Preheating area: 210mm * 340mm7 Dimensions: (left) W 580mm * (front) 650mm long 580mm * high8 Machine weight: Net weight 50KG
Hot air bga rework station/system LY R590, Bestest product
