H beam production line/ Cantilever auto submerged arc-welding machine
XMH-1000 Cantilever auto submerged arc-welding machine
1. Technical parameters
Serial | The parameter supplied by supplier |
1 | Width of the wing board: 200—800mm |
2 | Thickness of the wing board: 6--60mm |
3 | Height of the board: 200-1500mm |
4 | Thickness of the board: 6-32mm |
5 | Length of the work piece: 4000--12000mm |
6 | Welding speed: 0.24—2.4m/min |
7 | Weld arm moving from side to side: 700mm |
8 | Weld arm moving from hoist to lower: 800mm |
2. Supply range
a. Machine assembly: basis seat,traveling structure,transverse slippage structure, wire feeder wheel and so on.
b. Welding assembly: up-down guide pole,wire feeder machine rack
c. Arc guide assembly: welding torch,transverse moving structure and accessories.
d. Flux recycling system: Electrical control box, AC frequency conversion driving system.
e. Power transmission assembly: Tank chain and accessories.
f. Welding machine: DC-1000 submerged arc welding machine (1 set)
3. Brief introduction
The whole machine adopts the structure of cantilever trolley driving way, the main machine combined with traveling structure, cantilever frame body, electricmotion pole lifting structure and level moving structure, arc guiding structure, flux auto recycling system, auto submerged arc welding system, electric control system and so on. This machine is droved by frequency conversion motor system, which drags the whole trolley to do level moving. The flux recycling system recycle the flux and use it again.
4. Technical files
a. Using manual of the machine (Include electrical schematic)
b. Shipping list
c. The certification of the machine
d. The basis of drawing of the machine
e. Hydraulic using manual, inverter using manual,submerged arc welding using manual
XMH-1000 Cantilever auto submerged arc-welding machine
