Welcome to ECBAY
hot air BGA rework station BGA1600C
hot air BGA rework station BGA1600C

Detailed Product Description


input voltage

AC220V?? 50/60Hz? 10A

system power

2000W

pre-heating power in the bottom/highest temperature

1200W/350

Pre-heating area in the bottom

240*240MM

hot air power on the top/highest temperature

800W/450

temperature feedback

RTD sensor, close loop control

Flux in the hot air head

8,16,24 L/Minute can be chosen

Max chip size

70mm×70mm

Min chip size

1mm×1mm

Max chip weight

55g

Max PCB size

350mm×350mm

Max thickness of PCB

3mm

Suitable chip

BGA, CSP, LGA( Land Grid Array), Micro SMD,MLF,BCC

Dimension

545×440 ×488mmL*W*H

Weight

About 25 KGS

Adjustment accuracy

0.025mm

Min foot space

0.3mm

Function introduction

1Adopt best heating material to control disassemble and weld for BGA.

2Hot air and temperature can be adjusted, and generating high temperature rotate air.

3Moving heating head, easy operation.

4? There are two heating zone heat independently in the top and bottom. The first heating zone can control temperature, the second heating zone make PCB heat to get best welding effect.

5There are different temperature profiles in the top and bottom. Large power wind motor can cool rapidly to make PCB perfect.

6V trough to locate PCB, the max PCB is 450*400mm

7Adjusting PCB frame with anti-scald protection design

8Support frame in the BGA welding district, adjust support height to avoid going down of welding district.

920 segments warm-up controlling, it can save 2 groups setting temperature profiles.

10Adopt import high precision thermocouple to achieve inspect temperature minutely.

11With alarm and remind function after disassembly and weld. The circuit can cut off when short circuit. With super temperature protection function.

12With computer communication function, PC serial port inside, temperature interface outside, with software to achieve computer control.

13With different size hot air nozzle. It is easy to replace.

14Hand vacuum absorb pen to absorb BGA, the suction can be adjusted.

15With head lamp to increase ray in the working district. 

16It is suitable for lead and lead free welding.

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.