1 asphalt waterproof material 2 waterproof roof,underground, coating 3 good quality at water-resistance 4 anti-aging,anti-aci
asphalt waterproof coating liquid primer
Polyurethane waterproof coating, JS,PMC waterproof coating, Neoprene latex asphalt waterproof material
Polymer acrylic waterproof coating
Rapid hardening polyurethane waterproofing material requirements are as follows:The value of the pilot project specificationsOperation is not sticking time (seconds) 120 the followingCuring time (min) 30-60The proportion that the value of the coating material of ± 0.1Hardness (Shore A) 50-65Tensile strength than the tensile strength N/mm2 2.330% of the stress modulus N/mm2 below1.5
50% of the stress modulus N/mm2 below 2.0
Short break for more than 450% elongationTensile plot N / MM 280 or moreCrack resistance cracking strength N / MM 14 or moreTensile strength than the test temperature of -20 °C above100 below 300 Test temperature above 60 °C above 60When the clamp breaking elongation% between test temperature -20 °C above 250 or moreTest temperature of 23 °C above300 or moreTest temperature of 60 °C above 200 or moreHeating rate flexibility-like stretching for more than -4.0%below 1.0 Deterioration of tensile properties of tensile strength after treatment compared with % heat-treated above 80 below150 Exposure treatment for more than 60 below 150 Alkali treatment for more than 60 below150 Acid treatment for more than 80 below150 Breaking elongation% when heated above 400Exposure treatment for more than 400Alkali treatment for more than 400Acid treatment for more than 400Elongation properties when heated deterioration or significant deformation without cracksNo cracks or exposed to treatment for significant deformationOzone treatment significantly deformed without cracks orResistance to sagging sagging length MM 3.0 the followingNo wrinklesSolid component indicates that the value ± 3.0Thermal conductivity (kcal / mh °C) 0.10 the following
Note: 30% or 50% of the stress modulus, tensile test is the elongation of 30% or 50%, the elongation rate - stress intensity curve showing the tensile strength resins, such as the spacing of 60mm test fixture , then 30% of the value of the stress model, is stretched to 18mm when the stress intensity; the same value as 50% of the stress model, is stretched to 30mm when the stress intensity.
asphalt waterproof coating liquid primer
