1.High elasticity 2.Anti-corrosion, anti-ageing 3.No smell and toxity 4.The color is optional 5.Long shelf life
JS Polymer Cement Waterproof Coatings (double-component)
Characteristic
a) High adaptability to wet and dry base layer, not flowing on elevation.
b) Pigment can be added as you wish.
c) High elasticity and high durability.
d) Poison-free and odor-free, no pollution, easy construction short in construction time.
e) Ventilation property, no bulking even on wet base layer.
Applicable scope
This product applies to masonry, mortar, concrete, mal, wood, hard plastic, glass, plasterboard, foam board, asphalt, rubber, SBS, APP, polyurethane and civil construction(such as building, wall surface, subsurface, tunnel, bridge, pool, reservoir, bathroom and kitchen)
Performance
No. | Test | Preformance | |||||
I | II | III | |||||
1 | Solid content/% | 70 | 70 | 70 | |||
2 | Tension strength no processing/MPa ≥ | 1.2 | 1.8 | 1.8 | |||
3 | Fracture elongation no processing/% ≥ | 200 | 80 | 30 | |||
4 | Low temperature flexibility | -10°C no crack | - | - | |||
5 | Adhesion strength | no processing/MPa ≥ | 0.5 | 0.7 | 1.0 | ||
6 | Impermeability (0.3MPa,30min) | Watertight | |||||
7 | Anti-permeability(dorsal surface) ≥ | - | 0.6 | 0.8 |
Construction requirements
—Liquid material : powder material 8:12(weight)
—Construction temperature should be above 0°C
—Open-air project avoid rainy days or avoid construct on base surface with water
—Do not do second coating until the first coating is dry
—The construction of protective layer or decorative layer should be done only after the first coating is dry
Storage and transportation
1.The products should be stored in a dry place over 5 °C, and out of the sun and rain. The transportation should prevent the collision.
2.The storage time is six months, but the items can still be used if they passed the re-examination.
JS Polymer Cement Waterproof Coatings(double-component)