1. 3 ports Remote Socket 2. CE,FCC, UL 1 year warranty 3. Self learning type 4. 110V/1500W 5. Control Range: Max. 50m.
3 Ports Outdoor Wireless Remote Control with Single Keychain Transmitter
RATING:110VAC/60Hz/10A/1500W Tungsten
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condition:(1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation.The user manual or instuction manual or unnitententional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user authoritv to operate the equipment.
| Specification: | ||
| 1 | Rated Voltage: | AC110V /60Hz |
| 2 | Load Power: | 1500W per port |
| 3 | Rated Current: | 8-10A |
| 4 | Operating Temperature: | -25~45°C |
| 5 | Standby Power Consumption: | less than 0.015w |
| 6 | Operating Frequency: | 315/433MHZ |
| 7 | Remote Control Distance: | 5-15M with wall barrier 20-30M in open area |
NOTE:
This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferences to radio communication.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferences to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that to which the receiver is needed4. Consult the dealer or an experienced radio/ TV technician for help
BATTERY INFORMATION AND REPLACEMENTThe Remote Control uses a 3volt CR2032 lithium battery. To replace, Slide off the battery cover on the back off the Transmitter.Lnsert a new CR2032 lithium battery, making sure to match up the +and –polarity markings. To test, press the ON or OFF buttons to make sure the LED lights up. Slide the cover back in.Do not dispose of batteries in fire. Batteries may explode or leak.
Caution:1. Only use the batteries specified and be sure to match the +and –polarity markings.2. DO not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.3. Remove exhausted or dead batteries from the product.4. Remove batteries if product is not to be used for a long time.5. Do not dispose of batteries in fire . Batteries may explode or leak .As with all small items, these batteries should be kept away from children. If swallowed, seek medical attention immediately.
Instructions:Insert the Remose Base’s3-prong plug into a grounded outlet..If using outdoors,be sure to plug into a GFCI approved outlet.Plug appliance into outlet located on bottom of Remose Base.Using the Wireless Remote Control,press ON button to activate device.
Packing:
Unit packing size:5.6×4.6×1.4cm
Unit packing weight: 460g
CTN Size: 67.5×33×40cm
N.W.: 10.8kg, G.W.:11.86kg
30pcs/ctn
American style outdoor heavy duty wireless remote control socket
