Hioso Technology Co., Ltd. [China]

1.transmits 1-channel non-condensing digital video 2.support audio,data,ethernet 3.CE/RoHS/FCC/ISO9001:2008 4.OEM supported

Overview

It adopts modularization function box design; each video transceiver can transmit 2 channels non-condensing digital video. There are three 5-pin ports, or two 5-pin ports and one RJ45 Ethernet port on each transceiver. Each 5 pin port can be configured as 12 channels RS-232/485/422 data port2 channels bi-directional audio port2 channels unilateral switch value port or 2 channels TIL signal port. Ethernet can supply 10M or 100M wire speed, with 10/100M port adaptable.

Video transceivers can independently form a single/multi mode optical transceiver and be configured 12 piece audio/data extended board, transmitting multi-channel audiodata and switch value signals. It support to be configured a management plug, to implement network management function.

It is now widely used in security monitoring and control systemhighwayTraffic Control Photographic Systemautomation and intelligent residence.

Character

Industrial-level design with SMT techniques

Full digital transmission in fiber, multi-service flexible configuration on the same platform

Supply desktop and integrated card type

Based on large scale integrated circuit

Transmission in single-fiber, dual-fiber is optional

Fully compatible with PAL/NTSC/SECAM

Support asynchronous data (positive/reverse), transmission rate is up to 115.200Kbps

Support RS232RS422RS485 or Manchester code

Support SNMP

Carrier class centralized network management

Technical specification

Fiber port                                         

Port                            FC/SC/ST optional

Wavelength                 Single-mode1310nm/1550nm

                                  Multi-mode 850nm/1310nm

Transmission power      ≥-9dBm

Receiving sensitivity      -34dBm(bit error rate<10-11)

Transmission distance    Single-mode 20/40/60/80/100/120Km

                                     Multi-mode 2Km

Video

Signal type                                 PAL/NTSC/SECAM

Nominal input/output lever            1Vp-p

Nominal input/output impedance    75Ω

Bandwidth per channel                 8 MHz

Sample frequency                       16M/Hz

Quantization                               8bit

Connector                                  BNC interface

Audio

Bandwidth per channel                 20Hz~20K Hz

Sample frequency                        64K Hz/48K Hz

Quantization                                24bit

THD (Total Harmonic Distortion)     0.1% (typical value)

Audio connector                            RJ45 interface

Asynchronous data

Connector                RS232/RS485/RS422/ Manchester code

Working mode          Full/Half Duplex

Data rate                  115.200Kbps

Bit error rate             <1×10-9

Data connector          RJ45 interface

Ethernet

Standard                  IEEE802.3, IEEE802.3u

Working mode          10/100M adaptable, Full/Half Duplex

Connector                 RJ45 interface

Switch value

Number of channels     1 channel

Working mode             set open/shorted circuit alarm

Connector                   RJ45 interface

Operating environment

Power supply                  AC180V~240V; DC-48V; DC+24V

Operating temperature      0-50

Storage temperature        -40-+70

Relative humidity              95%

Dimension

172mm×141mm×19.7mm

Order information

1 channel video audio optical transmitter and receiver