Stainless steel powder with Fine particle size/Optimum particle size/High density, high purity/Low density,
Applying ultra-high water-atomization and restriction gas-atomization technology, AT&M can not only produce standard metal powder for PM but super-fine powder with particle size less than 10 um. The final products made from the metal powder are widely used in the industrial field like medical equipment, office equipments and consumables, automobile, hard wear, sports facility, clock and watch. . .
Characteristics
-Fine particle size -Optimum particle size
-High density, high purity -Low density, high purity
-Low oxygen content -Low oxygen content
-Controlled particle size distribution for MIM and Porous Products
Typical powder properties for MIM
Grade | Shape | S.D. (g/cm3) | T.D. (g/cm3) | O.C PPM | Mean particle Size(μm) |
D50 | |||||
316L | Spheroidal | 7.6-7.9 | >4.2 | <3000 | 9~11 |
17-4PH | Spheroidal | 7.6-7.9 | >4.2 | <3000 | 9~11 |
430L | Spheroidal | 7.6-7.9 | >4.2 | <3000 | 9~11 |
Typical powder properties for porous material
Grade | Shape | A.D. (g/cm3) | O.C PPM | Particle Size(mesh)
|
316L | Irregular | 1.8-2.3 | <2800 | -80+150, -150+250, -250+500, -150+325 variety of particle size |
304L | Irregular | 1.8-2.3 | <2800 | |
430L | Irregular | 1.8-2.3 | <3000 | |
410S | Irregular | 1.8-2.3 | <3000 | |
904 | Irregular | 1.8-2.3 | <3000 | |
17-4PH | Irregular | 1.8-2.3 | <3000 |
Other alloys and tailored particle size distributions, not listed, are available on request.
Stainless steel powder
