Welcome to ECBAY
Solar Workstation
Solar Workstation

Solar Workstation, intelligent control the temperature and operation of split pressurized solar water heating system

Solar Workstation

Introduce

Workstation suitable for single-pipeline Split pressurized solar system

Advantage1. Designed for self-sustaining solar operation2.Easy installation, save cost, beautiful appearance3.Easy to check the flux of pipeline, temperature display.

Components 1.Safety valve: make sure the system safety working2.Ball valve,check valve: brass material3.WILO pump: this pump is a standard device in the system,it required operating point can be preselected using one of the three levels. 4.Manometer: adopt hydraulic aseismatic manometer with a range from 0 to 10 bar indicates the system pressure. 5.Connect of expansion vesse: linstall expansion vessel, avoid the system working at minus pressure.6.Flow sensor: timely monitor medium flow of the whole system.. 7.Heat preservation material: EPS, method of operation: counterclockwise rotation to open and clockwise rotation to close.8.Screw thread: 1/2inch. 9.Maximum working temperature of pipeline: 110oC

Technical data:

 

Model ILA-SP1161.externality size: 450mm*310mm*150mm2.Max. self consumption: ≤3W3.Accuracy of temperature measuring: ±2oC4.Range of temperature measuring: 0~150oC5.Power of controlled pumps (temperature difference circulation pump, water-using end circulation pump): 600W6.electronic booster power: ≤3000W7.System working pressure 8 bar and safety valve response pressure 6 bar.8.input signal: 3 temperature sensors (for top of tank, for heat collector, for bottom of tank)9.output signal: 3 (electronic booster, temperature difference circulation pump and water-using end circulation pump)

 

Model ILA-SP1181.Externality size: 450mm*310mm*150mm2.Max. self consumption: ≤3W3.Accuracy of temperature measuring: ±2oC4.Range of temperature measuring: 0~150oC5.Power of controlled pumps(temperature difference circulation pump, water-using end circulation pump) or electromagnetic valve : 600W6.Electronical booster power: ≤3000W7.Input signal: 6 temperature sensors (PT1000 for heat collector, NTC 10k B=3950 for water tank)8.Output signal: 5 (electronic booster, 4 pumps or 3 pumps and 1 three way electromagnetic valve)9.System working pressure 8 bar and safety valve response pressure 6 bar.

Solar Workstation

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.