Welcome to ECBAY
freon air cooler unit
freon air cooler unit

1.unit cooler 2.excellent quality 3.complete in specifications 4.dependable performance 5.world-wide reknown reputation

1.unit cooler2.excellent quality3.complete in specifications4.dependable performance5.world-wide reknown reputation

The D/G series high efficiency air cooler is high efficient heat-exchanging device which uses new design, new material and new technology, having the advantage of light weight, long durability and high eficiency compared with products of the same kind. Imported production line is empolyed to manufacture wholly rippled fins of advanced design which can keep high heat-exchanging rate even during frosting. The coil unit which consists of heat-exchanging tubes and fins is fully hot-dip galvanized. It has the advantages of high heat exchanging efficiency, small hot resistance,good corrosion resisting property and quick defrosting. The fan selected is high efficiency, low noise outer rotor axial flow fan. It has the advanctages of big air flow, low power, and long delivering distance. Casing surface employs rust-proof stoving finish and plastic spraying techniques to achieve corrosion resistance, beautiful and clean appearance, and good removablity.

Cooling coil    Specific wholly rippled street fin, fin spacing 5,8,10,12,16mm Stell tubes φ20mm.Tube pattern60x52mm staggered.Hot-dip galvanized,and tested with gas pressure test of 2.4Mpa

Fan    Blow-through type or draw-air-in type outer rotor axial fan Motor protection up to IP54,and can be run continuously from -50ºC to 100ºC.electrical supply:380V/50HZ/3φ. Electrical is determined against the axial fan model.Casing   Galvanized steelsheets used. Rational processing technology is used to secure high intensity bump proof casing.    Good removablity with side plate, front plate and back plate.    Surface steel sheets are painted with fine stoving finish or other finish..Drip tray    Wholly plastic spraying and rust-proof threated. Portable construction,good removability.drain pipes are joined by built-in threads.Defrosting   Mainly water defrosting.   Requirement of electrical defrosting can also be satisfied.    Note:

    1. if specific application is required of the air cooler by customer,we can design different style and construction to meet it.    2.it is suggested that frost build-up should not exceed 4 mm in thickness to ensure the heat transfer efficiency of the high-efficiency air cooler. Otherwise, excessive frost must be removed away

freon air cooler unit

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.