plastic miller pulverizer 1.Low consumption 2.High spped 3.Milling superfine
plastic miller pulverizer
MF Series Plastic milling machine is a prefect machine for processing and grinding thermoplastics material such as HDPE, LDPE, LLDPE, ABS, PC, PS, etc, with high output and low power consumption. 1. With water cycle and wind cooling, the machine can be applied into processing heat sensitive material. 2. With the tail-wagging air stream (partly eddy flow) produced by the tail-wagging of the main shaft capstan of the machine, the input tail-wagging materials collide strongly with the board and the cutting blade, and was grinded into powdery (without sieving). 3. Both the board and the cutting blade are made of abrasion-resistant steel, with excellent performance after heat treatment. 4. With severeness of framework, the volume of the machine is quite small. If you open door closure, you can maintain it. It is completely airproof and without any dust leakage. 5. With winding reclaiming equipment, the machine is features by cooling materials evenly, quick cooling and some other characteristics.
| Model | MF-250 | MF-350 | MF-450 | MF-550 |
| Rotating Knife Diametermm | Ø 250 | Ø 350 | Ø 450 | Ø 550 |
| Main Motor Power(kw) | 11 | 30 | 45 | 55 |
| CoolingMethod | Water cooling | |||
| Fan Power | 1.5 kw | 3 kw | 3 kw | 5.5 kw |
| Vibrating Sieve Type | ZDS 600 | ZDS 800 | ZDS 1000 | ZDS 1200 |
| Capacity(kg/h) | About 50-120 | About 120-290 | About 300 | About 480 |
| Dimensions(mm) | 1500× 800× 2800 | 1700× 1500× 3700 | 1800× 1600× 3800 | 1900× 1700× 3900 |
| Weight(kg) | 60 | 1300 | 1600 | 2200 |
plastic miller pulverizer
