Welcome to ECBAY
Industrial Glycerine
Industrial Glycerine

Glycerin: 1.raw materials for making surfactant; 2. plasticizer; 3.packing:25KG or 250KG/drum.

 APLICAITON

Glycerin has lots of uses besides being used to make nitroglycerin (note: glycerin is not an explosive substance by itself. It has to be turned into nitroglycerin before it becomes explosive, so it's safe to work with in your kitchen). Some uses for glycerin include: conserving preserved fruit, as a base for lotions, to prevent freezing in hydraulic jacks, to lubricate molds, in some printing inks, in cake and candy making, and (because it has an antiseptic quality) sometimes to preserve scientific specimens in jars in your high school biology lab.

Glycerin is also used to make clear soaps. Highly glycerinated clear soaps contain about 15% - 20% pure glycerin. Known as "Melt and Pour" soaps, these soaps are very easy for the hobbyist to work with. They melt at about 160 degrees fahrenheit, and solidify fairly rapidly. Because of their high glycerin content, the soaps are very moisturizing to the skin. Unfortunately, this high glycerin content also means that the soaps will dissolve more rapidly in water than soaps with less glycerin, and that if the bar of soap is left exposed to air, it will attract moisture and "glisten" with beads of ambient moisture.

------------------------------------------------------------------------------------------------------------------------------

Material Safety Data Sheet

Glycerine

ACC# 10440

Section 1 - Chemical Product and Company Identification

MSDS Name: Glycerine Synonyms: Glycerol; 1,2,3-Propanetriol; Glyceritol; Glycic Alcohol; 1,2,3-Trihydroxypropane; 1,2,3-Propanetriol

Section 2 - Composition, Information on Ingredients

 

CAS#

Chemical Name

Percent

EINECS/ELINCS

56-81-5

Glycerine

100.0

200-289-5

Hazard Symbols: None listed. Risk Phrases: None listed.

Section 3 - Hazards Identification

 

EMERGENCY OVERVIEW 

Appearance: clear. Caution! May cause eye and skin irritation. May cause respiratory and digestive tract irritation. This is expected to be a low hazard for usual industrial handling. Target Organs: None known. Potential Health Effects Eye: May cause eye irritation. Skin: May cause skin irritation. Low hazard for usual industrial handling. Ingestion: Ingestion of large amounts may cause gastrointestinal irritation. Low hazard for usual industrial handling. May cause headache. Inhalation: Low hazard for usual industrial handling. Inhalation of a mist of this material may cause respiratory tract irritation. Chronic: No information found.

Section 4 - First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If irritation develops, get medical aid. Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse. Ingestion: Never give anything by mouth to an unconscious person. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Get medical aid if irritation or symptoms occur. Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear. Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated. Extinguishing Media: Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Provide ventilation.

Industrial Glycerine

Related Products
Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.