1. Using microcomputer chip control; 2. big power; 3. big displacement 4.motorcycle cdi unit 5.best price.6.high quality
Product name GS125(Suzuki King) digital CDI of motorcycle part
Applicable Models Used for GN125,GS125 series motorcycle
Features
1. Microcomputer chip controlled
2.DC power supply
3.hith energy ignition
4.Strong resistance to interference
5.Strong environment adaptation
6.into the angle of stability, low speed, high-speed ignition performance is good
Product performance
item | index | Remark |
Type | Inductive energy storage |
|
Arc state | AC arc |
|
Range of working voltage | 8V—16V |
|
Working current
| <40mA | Static, Supply voltage 14.5V |
<1.2A | 5000r/min Supply voltage 14.5v with ignition coil | |
Min.Rotate speed in continuous ignition | ≤200r/min |
|
Rotate speed range in continuous ignition | 200r/min—12000r/min |
|
Overvoltage protection voltage | 20V—25V |
|
Ignition inlet curve | In graph | Relative angle |
Flameout function | switch off the ignition flame | |
Working temperature range | -30 C~+60 C | |
Space in three needle is 6mm,space of triggering is 0.7mm,20s continuous ignition
Ignition period characteristic
Size and interface diagram
Wiring diagram
Help
G feet grounded ignition can only work, recommended to connect to the oblique support switch, neutral position switch and clutch switch, the working principle
1. motoecycle start, as the neutral gear switch and clutch switch always has a
ground switch, ignition work
2.When the motorcycle into the running state, at this point in neutral gear
switch and clutch switch are disconnected, if the oblique support switch also
off(oblique support in support of state), flame ignition, motorcycle run to
prevent fly
3.Only the oblique support switch connect to the ground (oblique support switch
is put away state), motorcycle can only run
Use help
1. As this product is inductive energy storage igniter, so must be choose to match
with the ignition coil
2. ignition timing control in addition to our standard curve given in addition,
can be adjusted according to user requirements
3. Trigger negative pulses required for the first positive pluses, the ignition
should not be installed near the heat source location
GS125 CDI of motorcycle part
