1. Composition: WNiFe, WNiCu, WCu, WC-Co 2. Surface: Ground, Polished 3. Stardard: AMS-T-21014 4. Usage: aircraft, shiled
Table 1.Properties of tungsten alloy ( AMS-T-21014 )
Class
| Nominal tungsten (weight percent) | Density (g/cc)
| Hardness ( HRC )(maximum) |
1 | 90 | 16.85 - 17.25 | 32 |
2 | 92.5 | 17.15– 17.85 | 33 |
3 | 95 | 17.75– 18.35 | 34 |
4 | 97 | 18.25– 18.85 | 35 |
Table 2. Mechanical Properties – Minimum Value ( AMS-T-21014 )
Class
| Ultimate tensile strength ( ksi) | Yield strength at 0.2percent offset (ksi) | Elongation( percent ) |
1 | 110 | 75 | 5 |
2 | 110 | 75 | 5 |
3 | 105 | 75 | 3 |
4 | 100 | 75 | 2 |
We supply tungsten alloy products such as WNiFe and WNiCu. The products are tungsten alloy rod, tungsten alloy ball, tungsten alloy block, tungsten alloy ring and tungsten alloy finished parts according to the user's drawing.
W-NI-FE tungsten alloys
Advantages:
High density(17.0-18.5g/cm3). Good machinability Good mechanical properties. High modulus of elasticity High absorption capacity against x-rays and γ-rays Harmless to the health and environments.Tungsten alloy products