1. Turnover Water Tank Wrie-drawing Machine 2. Application : For drawing the wire cord
TECHNICAL CONDITIONS OF WIRE DRAWING MACHINE
1.DRAWING PASSES: 23 (Customized)
2.MATERIAL:LOW CARBON STEEL WIRE
3.INLET: Φ1.8-Φ1.4MM
4.OUTLET: Φ0.416MM
5.RADIO REDUCTION:14.5%
6. FINISH PRODUCTS COMPRESSION RATIO:6-8%
7.TAKEUP SPEED: DESIGNED SPEED 14M/S
NORMAL DRAWING SPEED IS 10-12M/S.
8.NOISE LEVEL: ≤85DB(A)
MECHANICAL PART
1 1.MAIN STRUCTURE: TURNOVER,2 SETS OF CONE PULLEY,CONE PULLEY
FISSION ON CHIP,SURFACE TREATED WITH WC,COATING THICKNESS IS 0.05MM
2.DRIVE PART: COG BELT DRIVE.MAIN DRIVE USES ARC TOOTH;
TIMING BELT USES IMPORTED BRAND(CONTINENTAL);
MAIN PARTS OF THE ENGINE USE SKF IMPORTED BEARINGS.
3. MAIN ELECTRICAL MACHINE:22KW VARIABLE FREQUENCY MOTOR.
4. WATER TANK USES STAINLESS STEEL MATERIALS;
INSIDE THE TANK EQUIPPED WITH MANUAL-CONTROL LEVEL SYSTEM;
COOLING LUBRICATION:SUGGESTING BIG CIRCULATION WITH SELF-COOLING.
5. BE EQUIPPED WITH A DRAWING DIE IN FRONT OF THE RACK;
FINISHED DIE-SET IS MADE OF BRASS.
6. BE EQUIPPED WITH STRAIGHTENING SET,STRAIGHTEN GEARING IS INTEGRALLY PRESSED;
TILTING FORCE:<200N.
MAIN ASSEMBLIES
1.Cone pulley:packing separately,surface coating with tungsten carbide (double roll tube included),lifetime is ensured to be more than 20,000hours.
2.Transmission :the brand of timing belt is NINGBAO of Ningbo, brand of bearings is SKF.Thread round is overall quenched. (warranty period:1year)
3.Transducer:All use ABB/Mitsubishi products.
4.Sensing element: use TURCK,German.
5.Relay and other Low voltage electricals: Schneider,France.
6.PLC,display screens use SIEMENS/Mitsubishi products.
7.The water tank use stainless steel materials.
LT318 Turnover Water Tank Wrie drawing Machine
