nail making machine 1.recovery of cost in 2 months 2.can use both the waste and new steel 3.2 people can operate
Nail making machine
Features:
1 .Both of the scrap iron wire and the new steel rod can be used to make nails. 2 .This nails machine can feed the materials automatically. 3 .This nails machine has the features of high speed, low noise, less impact.
4. All the main components are made of quality steel, such as shaft, cams and gear.
5. The nails made by the machine will be straight, the point of the nails will be sharp and symmetrical, the nails cap will be round, every nail will be perfect.
Model | WZ94-6A | Z94-5A | Z94-4A | Z94-3A | Z94-2A | Z94-1A |
Max diameter of nail | 6mm | 6mm | 4.5mm | 3.1mm | 2.8mm | 1.6mm |
Min diameter of nail | 3.1mm | 2.8mm | 2.8mm | 1.8mm | 1.2mm | 0.9mm |
Max length of nail | 180mm | 150mm | 100mm | 70mm | 50mm | 25mm |
Min length of nail | 70mm | 50mm | 50mm | 30mm | 16mm | 9mm |
Nail making speed | 220pcs/min | 220pcs/min | 260pcs/min | 320pcs/min | 350pcs/min | 450pcs/min |
Motor power | 10kw | 5.5kw | 4kw | 3kw | 2.2kw | 0.8kw |
L*W*H | 3*1.8*1.9m | 2.4*1.7*1.65 | 2.2*1.6*1.65m | 2*1.4*1.4m | 1.7*1.3*1.4m | 1.5*1.3*1.2m |
Weight | 5.5tons | 2.2tons | 2tons | 1.5tons | 1tons | 0.375tons |
Process flow:
Steel wire--- wire drawing--- nail making --- nail polishing – finished nails
This is the wire drawing machine, it can process the wire thinner, then you can get the diameter that you need.
This is the nail polishing machine, when the nails have been made, they will not be very shining, so you need the nail polishing machine.
This is wire pointing machine, to sharpen the head of the wire, then it can enter the wire drawing machine.
This is nail knife grinder, when the nail knife is not so sharp, you will need the machine to sharpen it.
The whole line is being transported to the port.
New!Z-94 automatic high speed nail making machinery
