Welcome to ECBAY
guard rail roll forming machine
guard rail roll forming machine

Detailed Product Description


 guard rail roll forming machine

The structure of equipment

 1, Hydraulic decoiler

l       Single unrolling machine, one side can put material

l       Adopt automatic hydraulic system

l       Coil weight (Max):7000kg

l       Coil dia (Max):1600mm

l       Oil cylinder dia:1200mm  working pressure: 10mpa

l       Coil Width(Max.):500mm

2, feeding, leveling

l       feed into unit oriented wheel(can right and left adjust)

l       into feeding roller, dia is  180mm,material 45# steel, quenched 48°-52°, chromed

        leveling is three roller above and four roller below, quenched and chromed

3, punching (can right and left adjust)

l       using hydraulic punching

l       oil cylinder dia: 140mm

l       working pressure:20mpa

l       mould material: Cr12  quenched 58°-62°

l       hydraulic power:7.5kw

l       size: 1.5m long*1.1m wide*1.2m high

4,roll forming

l       main motor power: 45kw

l       Decelerating motor: BWD14-43-37kw, made in Shanghai or

Changzhou

l       drive: gimbal driving,120*500

l       main shaft dia: 100mm   material: 45forge steel

l       roller material: GCR15 quenched 58°-62°,chromed

l       roll station:17stations

l       Timing by transducer:5m--20m/min(not including punching)

l       Transducer: Panasonic made in Japan. 380V 50HZ

l       Computer: PLC

l       Computer operating panel: touching screen

5, cutting

l       hydraulic cut

l       knife material: Cr12,quenched 58°-62°

l       oil cylinder dia:250mm

l       working pressure:30mpa

l       working journey: 80mm

6, the Outside size:

l       18m long*2.2m wide*1.5m high

7, Run out table

l       Jointed by 60mm*40mm tube (can be adjusted to up and down)

l       size:1.5mlong*0.8mwide*0.6-1mhigh(can be adjusted)

The parts of machine

l     hydraulic passive Uncoiled,  Forming Machine ( feeding, leveler, roll mill, cutting,  punching, PLC computer, Hydraulic station, cutting), and simple run out shelves 3pcs, packing list 1 pcs.

4:The production flow of equipment

DecoilingFeeding(take the sheet to the first station)leveling----Punching of the sheet roll forming----hydraulic cut to lengthproduct packing manual

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.